OWNER'S IJSANSUI MANUAL 22" TFT LCD DIGITAL TV WITH DVD PLAYER HDLCDVD220 v. ,) Eo mS.TAL r.u=.o DIGITALI Digital Out .,_H._._,_,_,o_ Mo_.,_o,_ ,.T_ If you purchase a universal remote control from your local retailer, please contact the remote manufacturer I required programming code. ATTENTION I When shipped from the factory, the Signal Type option is set to the "Cable" (Cable Television) mode. AIR/CABLE MODE SELECTION If not using Cable TV, set this menu option to the "Air" position.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the CAUTION presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE SHOCK, RISK OF ELECTRIC DO NOT REMOVE (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED WARNING: CAUTION: SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus 6) Clean only with a clean dry cloth. 7) Do not block any ventilation 8) Do not install near any heat sources amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
IMPORTANTSAFETY INSTRUCTIONS(continued) 20) When replacement parts are required, be sure the service technician uses replacement the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician determine that the unit is in proper operating condition.
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit. A 10cm "-..
Featu res LCD color TV With DVD/CD player Unique space saving design combines a 22" LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc.The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents IMPORTANT SAFETY INSTRUCTIONS ........... 3 SAFETY PRECAUTIONS ................................. 5 IMPORTANT NOTICE ....................................... 5 Features ............................................................ 6 Contents ........................................................... 7 Disc ................................................................... 8 Location of controls ........................................... 9 Remote control ............................................
Disc Playable discs Disc type and logo mark DVD Video v =o E o content Audio + Video (moving pictures) CD-DA Audio DIGITAL AUDIO The following discs are also available. • DVD-R/RW discs of DVD video format. • CD-R/RW discs of MP3/WMA/JPEG. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors.
Location of controls Front Remote sensor -- POWER -- indicator Left side -- EJECT button DISC slot -4 -- VOLUME +/- buttons .(O9-+-,' -- CHANNELA/I_ (PLAY) button CHANNELI , O-f-: -- CHANNELV/II -- MENU button -- INPUT/ENTER -- POWER (STOP) button INPUT/ENTER O-- button PowEn O- To display the menu screen. Press MENU button to display the menu screen. CHANNEL A/V buttons, VOLUME +/- buttons and INPUT/ENTER setting during the menu screen operations.
Location Rear of controls (continued) side COMPONENT/AUDIO VIDEO IN jacks IN jacks (VIDEO/S-VIDEO/AUDIO(L/R)) 111111111 HEAD PHONE AC INPUT jack jack PC MONITOR IN jack RF (ANT) IN jack PC/DVI AUDIO IN jack COAXIAL HDMI/DVI IN jack DIGITAL AUDIO OUT jack
Remote control POWER Power On/Off DISPLAY/- Call TV information Call DVD information TV/DVD Switch __ (EJECT) Eject a disc 0-9 Direct channel selection Input setting Enter a password VOL +/- Adjust volume of TV MUTE Switch off the sound SLEEP Sleep timer SETUP TV MENU TV mode - Display menu of TV DVD mode - Call up initial setup mode Input "-" for digital channels ®OO ©@@0* DISPLAY TV/DVD VOL ®®®o ®®®O L MUTE SLEEP SETUP/®ODvD _MENU TV/AV and DVD of TV DVD MENU Display CH ,,N/
Remote control Inserting 1 (continued) Batteries Open the battery compartment ,I cover in the direction of the arrow, Install two "AAA" batteries, paying attention to the polarity diagram in the battery compartment. Replace the compartment cover. ---___/_ ....... Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30 ° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box, Some cable companies offer "premium pay channels" where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Setting the on-screen language 3 4 Press • or • to select"Signal You can choose from three different languages (English, French and Spanish) for the on-screen displays. Select the language you prefer first, then proceed with the other menu options. 5 Press 4 or • to select"Air" O Press EXIT/CANCEL screen. 1 Press • or • to select"Auto press • or ENTER. Ch Memory", then Type". or"Cable". To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx.
NOTE: • Memorizing channels is best accomplished during evening "PRIMETIME" hours, as more stations are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory. • If you are unsure of the digital channels available in your area, you may visit www.antennaweb.orq to receive a list based on your address or zip code.
VHF/UHF/CABLE CHANNELS Air Cable VHF 2-13 VHF 2-13 UHF 14-69 STD/HRC/IRC 14-36 (A) (W) 37-59 (AA) (WW) 60-85 (AAA) (ZZZ) 86-94 (86) (94) 95-99 (A-5) (A-l) 100-125 (100) (125) 01 (5A) • • • • Channel number V-Chip rating Sleep timer Audio information (Stereo or SAP) Press DISPLAY NOTE: • If a channel with no broadcast is selected, the sound will automatically be muted. • It may take a few seconds for a digital channel picture to appear on screen after being selected.
3 4 5 Press • or • to select "Ch Label", then press • or ENTER. The "Ch Label" menu will appear. Press 41or • to select a channel you want to label, then press •. Press 41or • repeatedly until the character want appears in the first space. you 6 VCR DVD : Uses the default label name :Video cassette recorder : DVD video DTV SAT CBL HD : Digital TV set-top box : Satellite box : Cable box : HDMI device (only for HDMI inputs) Press EXIT/CANCEL screen.
./i ¢--I" Press • or • to select"V-Chip", 4 or • to select "On". 5 6 then press To change 1 Press • or • to select"V-Chip Set", then press • or ENTER. The V-Chip Set Menu appears. Press • or • to select which rating will be used, then press • or ENTER. Each rating below will appear. 2 3 5 You can set the rating using age level and genre.
receiving a digital signal for the current station. Closed Caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language.
"--2 [ Press EXIT/CANCEL screen. NOTE: • You cannot Color" as a • You cannot Opacity" to iliiii_¸ ii_!ii!i!i!i_!!!ii_ !i;_!_!_i;!ii ;i!! ;;i_i iii!_i_!ii:!!!i!i!!!!ii;!iii!iiiiiiii!:ii!iiii! !ii!i ¸l!lilililililililililililililililililililililililililililililililililililililililililililililili_!i_ ;ii to return to the normal set both "Text Color" and "Background same color. set both "Text Opacity" and "Background "Transparent".
Setting the picture size You can view 480i and 480p format programs in a variety of picture sizes-Natural, Cinema Wide1, Cinema Wide2 and Full. Selecting 1 the picture Press SETUP/TV The top and bottom edges of the picture may be hidden. size MENU Cinema Wide2 picture size (for letter box programs with subtitles) To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom. in the TV mode.The TV menu screen will appear.
Picture control adjustment in the PC mode You can adjust to optimize the TV in the PC mode. ..4 | 2 the performance 4 3 Press • or • to select "DNR". Press • or • to select "On" or "Off". Press INPUT SELECT, then press •/v or Number button (4) to select the PC mode. Press SETUP/TV MENU.TheTV menu screen .4 Press • or • to select"Picture", ENTER. then press Press • or • to select"PC Setting", or ENTER. The PC Setting menu will appear. • or then press • 2 Press•or• to adjust.
Press • or • to select "HDMI Audio". Press • or • to select "HDMI" or "DVI". ,4 Z-'l" Press EXIT/CANCEL screen. to return to the normal HDMI: NOTE: • Generally you can leave yourTV in stereo mode because the TV automatically outputs the type of sound being broadcast (stereo or mono). • If the stereo sound is noisy, select "Mono" to reduce the noise. 1 3 4 Press • or • to select"Audio", ENTER. buttons Press SETUP/TV MENU in the TV mode.
Resetting your settings The Reset function factory settings. 1 returns Press SETUP/TV your settings MENU Preparation to the in the TV mode.The TV menu screen will appear. Press • or • to select"Setup", ENTER. 3 then press • or The following pages describe operation in DVD mode. Preparation Before DVD/CD preparations. 1 Press • or • to select"Reset". operation, the setup/ please make the following Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.
Playback proced ure Special playback 1 2 Fast Forward Playback Press SEARCH Im_ during normal playback. Each press of SEARCH _1_ will increase the speed of the search IN_ (x 2), _ (x 4), _ (x 8), _ (x 15). (CD: _ (x 2), _ (x 4), _ (x 8), _ (x 20)) Press TV/DVD to select DVD mode. Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.
MP3/WMA/JPEG and Audio CD playback 3 Operation This player can play back MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce MP3/WMA/JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/ JPEG-encoding software (not supplied). The Apple-HFS-System cannot be played. MP3/WMA/JPEG Limitations on display • The maximum number for display is 15 characters. Long file names will be condensed.
JPEG playback: 1 In the file browser, press•/v JPEG file. to select the desired Display Picture To display a thumbnail list, press DVD MENU. Press •/v/_l/, to select the desired file. (To return to the file browser, press TOP MENU.) : On Mode TV Screen :Auto : 16:9 Off: Plays back one file at a time. 5 Seconds: Plays back images in the form of a slide show at 5 second intervals. 2 Press ENTER The selected picture appears on the TV screen.
Random playback (CD) 1 2 4 Press A/v In the file browser, press "Mode". A/v/_l/=,- to select Press ENTER to select"Random". to select "Program View", then press ENTER. Program View shows only the programmed files that you have added in Step 2. 3 Press PLAY. The Random Browser View Program View In the Program View, press PLAY. The files start to playback in programmed order that were added by you.
4 Press ENTER. • Playback starts. • When you change the title, playback starts from Chapter 1 of the selected title. • Some discs may not work in the above operation. • During the A-B Repeat Playback the ANGLE feature will not operate. • You may not be able to set A-B Repeat, depending on the scenes of the DVD. • A-B Repeat does not work with an interactive DVD, MP3/M PEG/WMA/JPEG-CD. Marking desired scenes Repeat playback Title, 1 2 Chapter The TV/DVD stores the points that you want to watch again.
1 Press AUDIO during The current Changing angles playback. soundtrack language will appear. When playing angle facility, 1 back a disc recorded with multiyou can change the view angle, Press ANGLE The current 2 Press AUDIO repeatedly language is selected. The on-screen seconds. during playback. angle will appear. until the desired display will disappear after a few NOTE: • If the desired language is not heard after pressing AUDIO several times, the language is not recorded on the disc.
Setting the language You can select the language of "Menu", and "Audio" if more than one languages recorded onto the disc. 1 2 3 You have the following screen sizes to choose from: 4:3 I'"1 Letterbox When playing back a wide screen DVD disc, it displays the wide picture with black bands at the top and bottom of screen. 4:3 E1 Panscan It displays the wide picture on the whole screen with left and right edges automatically cut off. 16:9 r--] Wide A wide screen picture is displayed full size.
4 | 2 3 Press SETUP/TV MENU in the stop mode or No Disc. Press • or • to select [] option, then press ,/D, or ENTER. Press • or • to select"Picture _,- or ENTER. Mode", then press Press • or • to select your desired then press ENTER. Digital You can select the digital output sound format corresponding to your system connection, 1 picture mode, 2 Display TV Screen :On Out 3 Press SETUP/TV MENU in the stop mode or No Disc. Press • or • to select (ij_ option, then press 4/_,- or ENTER.
Parental ,4 ¢-'1" The parental level list will appear. Press • or • to select the level 1 to level 8. The limitation will be more severe as the level number is lowered.Then press ENTER. 5 : o_ Press ENTER. Now your new password has been set. Be sure to remember this number! NOTE: • Do not forget the password. If you forget the password, contact Customer Service at 1-800-2890980. The original remote control will be required.
Language code list Enter the appropriate Language Name code number for the initial settings Code Language Name "Menu", "Subtitle" Name and/or "Audio" (see page 32).
Connections to other equipment The exact arrangement you use to interconnect various video and audio components on the model and features of each component. Check the Owner's Manual provided the location of video and audio inputs and outputs. To connect the LCD TV/DVD to a VCR Rear of the unit @ @ [] @ to this unit is dependent with each component for To VIDEO/AUDIO @_.
Connections to other equipment To connect a HDMI or a DVI device to the (continued) unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Rear of the unit TO PC/DVl AUDIO IN i:_,_i:_:] TO HDMI/DVl _ _ II | | IN TO HDMI out .........
Connections to other equipment (continued) To connect the TV/DVD to a camcorder, or a TV Game To playback from a camcorder, connect the camcorder to the unit as shown. This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
Reception d istu rbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS I POSSIBLE with your TV/DVD. Consult your local SOLUTIONS I PAGE • POWER TV/DVD does not operate. TV BROADCAST • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in.
Problems and troubleshooting • SYMPTOMS I (continued) POSS,BLESOLUT,ONS I PAGE DVD • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 26 8 8 No picture. • TV/DVD selector is not set correctly. 25 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. 26 37 Playback doesn't start. Picture is distorted CUE or REVIEW.
Specifications GENERAL Power supply: AC 120V 60Hz Power consumption: Operation: 65W Stand by: lW Weight: Dimensions: 5.8 kg (12.8 Ibs) Operating temperature: Operating humidity: Width: 536.5 mm (21-1/8 inches) Height: 439.5 mm (17-5/16 inches) Depth: 207 mm (8-1/8 inches) 5oc. 40oc Less than 80% TELEVISION Type: 21.6 inches (548.
IJSANSUI® fimited WARRANTY LCD TV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship normal use and conditions for a period of 1 year from date of original purchase in the United States.
IIIIIIIIIIIIIIIIMHIIIIIIIII J51H0201A S H 08/04 [] Printed in Thailand
