OWNER’S MANUAL GUIDE D’UTILISATION FRANÇAIS ENGLISH 19” TFT LCD DIGITAL TV WITH DVD PLAYER TÉLÉVISEUR NUMÉRIQUE AVEC ÉCRAN TFT À CRISTAUX LIQUIDES DE 19 PO ET LECTEUR DVD HDLCDVD195 ATTENTION ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
ENGLISH 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
IMPORTANT SAFETY INSTRUCTIONS (continued) 23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 24) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage.
SAFETY PRECAUTIONS ENGLISH The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
How to attach the stand How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before performing work spread cushioning over the base area to lay the TV on. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its back onto a table. Align the stansd’s bottom-plate (supplied) as seen here. It will fit in only one direction. Press it in direction of arrow until ‘click’. Finally secure the bottom-plate with 2 screws (supplied).
Features LCD color TV With DVD/CD player ENGLISH Unique space saving design combines a 19” LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 IMPORTANT NOTICE .......................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 Features............................................................7 Contents ...........................................................8 Disc...........................................................
Disc Disc type and logo mark DVD Video content Audio + Video (moving pictures) CD-DA Audio The following discs are also available. • DVD-R/RW discs of DVD video format. • CD-R/RW discs of MP3/WMA/JPEG. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors. • If you insert an irregular shaped disc, it may get stuck and cause a malfunction.
Location of controls Front Left side DISC slot EJECT button VOLUME +/– buttons CHANNEL /1 (PLAY) button CHANNEL /3 (STOP) button MENU button INPUT/ENTER button POWER button To display the menu screen. Press MENU button to display the menu screen. CHANNEL / buttons, VOLUME +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations.
POWER Power On/Off DISPLAY/– Call TV information Call DVD information Input “–” for digital channels TV/DVD Switch between TV/AV and DVD (EJECT) 0-9 Eject a disc Direct channel selection of TV Input setting Enter a password VOL +/– Adjust volume of TV MUTE Switch off the sound SLEEP Sleep timer SETUP TV MENU TV mode - Display menu of TV DVD mode - Call up initial setup mode DVD MENU Display DVD menu CH ENGLISH Remote control / Select channel of TV ▲▼◀▶ Cursor buttons ENTER Enter in
Remote control (continued) Inserting Batteries the battery compartment two “AAA” batteries, 1 Open 2 Install cover in the direction of the arrow. paying attention to the 3 Replace the compartment cover. polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack Antenna Jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. ENGLISH If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
The Starting Setup menu appears the first time you turn on the TV, and assists you to select the menu language, specify the Air/Cable setting, and program your channels automatically. IMPORTANT: Make sure that the antenna or cable TV system connection is made! 1 To turn on the TV, press POWER (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins. Press ◀ or ▶ to select your desired language.
DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear. 62-001 HDTV Moving Picture1 CH-1 Digital Air Sleep Timer Off English No Program Information is available Quick guide for menu operation Call menu and for example: Select Language. 1 2 Press INPUT SELECT to select TV mode. Press SETUP/TV MENU. The TV menu screen will appear.
Convenience functions You can change the default settings to convenience use. Selected Items Picture Brightness Setting / Contrast / Sharpness / Color / Tint Color Temperature Backlight Setup hint You can adjust the picture quality to your preference. ENGLISH Icon Picture Bluish (Cool) / Neutral (Standard) / Reddish (Warm) The Backlight feature adjusts the screen brightness for improved picture clarity.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode. Air/Cable selection 1 2 3 4 Select “Channel”, then press ▶ or ENTER.
All channels are deleted from the channel memory. 1 2 3 4 Select “Channel”, then press ▶ or ENTER. Ch Label Channel Number Ch Label Label Clear Press ▲ or ▼ to select “Add/Delete”, then press ▶ or ENTER. Press ▲ or ▼ to select “Clear All”, then press ▶ or ENTER. : Select - Checking the digitalsignal strength This TV will allow you to view the digital signal meter for digital channels. Select “Channel”, then press ▶ or ENTER. Press ▲ or ▼ to select “DTV Signal”.
Setting the V-Chip Genre: ALL D L S V FV An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. Movie Rating Movie Rating To register a password 1 2 G PG PG-13 R NC-17 X Select “Lock”, then press ▶ or ENTER.
6 7 Press ▲ or ▼ to select “V-Chip”, then press ◀ or ▶ to set “On”. Press ▲ or ▼ to select “V-Chip Set (DTV)”, then press ▶ or ENTER. If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed. Set your preferred content rating limits for the additional rating system. To clear the all V-Chip settings 3 4 Select “Lock”, then press ▶ or ENTER. Use Number buttons (0-9) to enter your password, then press ENTER. The Lock menu will appear.
4 5 6 Press ▲ or ▼ to select “Digital CC Preset”, then press ◀ or ▶ to select “Custom”. Natural In some cases, this image will display the size of standard 4:3 with a black side bar. Press ▲ or ▼ to select “CC Advanced”, then press ▶ or ENTER. The CC Advanced menu will appear. Press ▲ or ▼ to select the desired item, then press ◀ or ▶ to change the setting.
Preparation Playback procedure The following pages describe the setup/ operation in DVD mode. 1 2 Before DVD/CD operation, please make the following preparations. 1 2 3 Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER. NOTE: • When connecting to other equipment, unplug the unit from the AC outlet. Press POWER on the unit or on the remote control to turn on the unit.
Special playback Fast Forward Playback Press SEARCH during normal playback. Each press of SEARCH will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY. Review Playback Press SEARCH during normal playback. Each press of SEARCH will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY.
File number Elapsed time Selected file name 1 1/15 00:00:00 /MP3-5.MP3 MP3-5 Select Files MP3-6 WMA-11 File list Repeat :Off Mode :Off WMA-12 Picture-1 Picture-2 Picture-3 Picture-4 Tool kit window Music Playing • In case the current directory includes 9 files or more, press ▲ or ▼ to scroll in the file list. • To see contents in folder, select the folder and then press ENTER. To return to the parent directory, select “ Go Up ...” then press ENTER.
3 4 Press ▲/▼/◀/▶ to select “Add To Program”. Then press ENTER. All marked files are added into the program list. When you finish storing the files you want into the Program list, select “Edit Mode” again and press ENTER to release edit mode. Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 WMA-3 MP3-1 MP3-2 Edit Mode Program View MP3-3 WMA-3 Add To Program Edit Mode In the Program View, press PLAY. The files start to playback in programmed order that were added by you.
Marker 1 Marker 2 Marker 3 Title, Chapter Playback: 1 2 Press PLAY MODE during playback or stop mode. Press ENTER repeatedly to select “Chapter” or “Title”. The unit automatically starts repeat playback after finishing the current title or chapter. • If you set the repeat mode during stop mode, press PLAY to start Repeat playback. Play Mode Repeat 3 : Off Press PLAY MODE again to make the screen disappear. • In stop mode, press PLAY to start Repeat playback.
Subtitles Turning the subtitles on and off When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during playback until “Off” appears. Off 2 3 Press ▲/▼ or ◀/▶ to select the desired title. Press ENTER or PLAY. The playback of the selected title will start. NOTE: • Depending on the DVD, you may not be able to select the title. Depending on the DVD, a “title menu” may simply be called a “menu” or “title” in the instructions supplied with the disc.
Function Setup Picture Setting item Menu *1 Subtitle *1 Audio *1 TV Screen *2 Description English / Francais / Espanol The selected language will be heard or seen. Other Other language can be selected (see the “Language code list” on page 31). Off (subtitle) Subtitles do not appear. Original (Audio) The unit will select the first priority language of each disc.
Parental control 1 Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. 2 Password and setting: 3 1 2 3 Press SETUP/TV MENU in the stop mode or No Disc. Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. Press ▲ or ▼ to select “Parental”, then press ▶ or ENTER. “Enter Password” screen will appear. Press “0000” using Number buttons (0-9). (This is pre-setting password of this unit). Then press ENTER.
Language code list Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925 Amharic 1123 Galician 1722 Malay 2329 Spanish 1529 Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931 2933 Armenian 1835 German 1415 Maltese 2330 Swahili Ass
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.
Connections to other equipment (continued) To connect the TV/DVD to a PC (Personal Computer) Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug.
Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER TV/DVD does not operate. • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. 12 TV BROADCAST RECEPTION Poor sound or no sound.
SYMPTOMS (continued) POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 23 8 8 No picture. • TV/DVD selector is not set correctly. 23 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. – 24 33 Picture is distorted during CUE or REVIEW.
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: TELEVISION Type: Display method: Number of Pixels: Tuner type: Receiving channels: Inputs: Outputs: Speaker: Audio output power: DVD/CD player Signal system: Applicable disc: Pickup: ACCESSORIES AC 120V 60Hz Operation: 38W Stand by: 0.8W 4.2 kg (9.3 lbs) Width: 472 mm (18-9/16 inches) Height: 362 mm (14-1/4 inches) Depth: 174 mm (6-7/8 inches) 5˚C - 40˚C Less than 80% 18.5 inches (470.
