Operation Manual

46
Zooming/Locating desired scene
NOTE:
You can select the Pause, Slow or
Search playback in the zoom mode.
Some discs may not respond to zoom
feature.
•
•
Zooming
This unit will allow you to zoom in on the frame image. You can then
make selections by switching the position of the frame.
1
Press ZOOM during playback.
The center part of the image will
be zoomed in.
Each press of ZOOM will change
the ZOOM magnification
1 (x
1.3),
2 (x 1.5) and 3 (x 2.0).
1
2
Press ▲/▼/◀/▶ to view a different part of the frame.
You may move the frame from the center position UP, DOWN,
LEFT or RIGHT.
3
In the zoom mode press ZOOM repeatedly to return to a 1:1
view (
Off).
Locating desired scene
Use the title, chapter and time recorded on the disc to locate the
desired point to play back.
1
Press JUMP during playback or
resume stop mode.
Time
Title
Chapter
Jump
2
Press ▲ or ▼ to select the “Time”, “Title/track” or “Chapter”.
3
Press Number buttons (0–9) to input the number.
If you input a wrong number, press CANCEL.
Refer to the package supplied with the disc to check the
numbers.
•
•
4
Press ENTER.
Playback starts.
When you change the title, playback starts from Chapter 1 of
the selected title.
Some discs may not work in the above operation.
•
•
•
5Z90101A.indd 465Z90101A.indd 46 07.9.3 3:48:59 PM07.9.3 3:48:59 PM