OWNER’S MANUAL 19” TFT LCD DIGITAL TV WITH DVD PLAYER HDLCDVD190 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. TV/CABLE MODE SELECTION When shipped from the factory, the Tuning Band option is set to the “Cable” (Cable Television) mode. If not using CABLE, set this option to the “Air” position.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS (continued) EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ELECTRIC SERVICE EQUIPMENT ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS NEC-NATIONAL ELECTRICAL CODE S2898A POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that h
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit. 10cm Notes when mounting the LCD TV/DVD on a wall • When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the LCD TV/DVD and the wall.
Features LCD color TV With DVD/CD player Unique space saving design combines a 19” LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc. The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 IMPORTANT NOTICE .......................................5 Features............................................................6 Contents ...........................................................7 Disc...................................................................8 Location of controls...........................................9 Remote control ................................
Disc Playable discs Disc type and logo mark DVD Video content Audio + Video (moving pictures) CD-DA Audio The following discs are also available. • DVD-R/RW discs of DVD video format. • CD-R/RW discs of MP3/WMA/JPEG. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors.
Location of controls Top MENU button CHANNEL ▲/▼ buttons INPUT button VOLUME +/– buttons PLAY button POWER button SKIP button STOP button Front EJECT button Loudspeakers POWER indicator Remote sensor To display the menu screen. Press MENU button to display the menu screen. CHANNEL ▲/▼ buttons and VOLUME +/– buttons can be used to select the desired setting during the menu screen operations. 9 5Z90101A.indd 9 07.9.
Location of controls (continued) Right side DISC slot Rear HEADPHONE jack COMPONENT AUDIO IN jacks PC IN jack COMPONENT IN jacks PC AUDIO IN jack RF (ANT) IN jack AV IN jacks COAXIAL DIGITAL AUDIO OUT jack 10 5Z90101A.indd 10 07.9.
Remote control Page POWER Power On/Off DISPLAY/– Call TV information Call DVD information Input “–” for digital channels TV/DVD Switch between TV/AV and DVD (EJECT) 0-9 15, 19, 38, 39 20, 22, 34 38 19 15, 19, 38, 39 Eject a disc 39 Direct channel selection of TV Input setting Enter a password 19 46 23~26, 55~57 VOL +/– Adjust volume of TV MUTE Switch off the sound 20 SLEEP Sleep timer 21 SETUP TV MENU TV mode - Display menu of TV 15~18, 21~29, 31~37 DVD mode - Call up initial setup mode
Remote control (continued) Inserting Batteries the battery compartment two “AAA” batteries, 1 Open 2 Install cover in the direction of the arrow. paying attention to the 3 Replace the compartment cover. polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 15 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Select the language you prefer first, then proceed with the other menu options. turn on the TV, press POWER. 1 To(POWER indicator on the front of the unit blinks while starting. It may take approx. 15 seconds for a picture to appear on screen.) 2 Press TV/DVD to select TV mode. 3 Press SETUP/TV MENU. The menu screen will appear. ▲ or ▼ to select 4 Press “Setup” menu, then press ▶.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Tuning Band menu option to the Air mode. When shipped from the factory, this menu option is in the Cable mode. Air/Cable selection SETUP/TV MENU in the TV mode. The menu screen will 1 Press appear.
Memorizing channels Automatic channel search SETUP/TV MENU in the TV mode. The menu screen will 1 Press appear. ▲ or ▼ to select 2 Press “Setup” menu, then press ▶. Press ▲ or ▼ to select “Auto Ch Search”. Picture Cable Tuning Band DTV Signal Auto Ch Search Audio Add On Ch Search Manual Ch Set Channel Labels Setup English Menu Language Reset Press ▶ or ENTER. The 3 TV will begin memorizing all the channels available in your area.
Memorizing channels Manual Ch Set You can select the channel that you want to skip. SETUP/TV MENU in the TV mode. The menu screen will 1 Press appear. ▲ or ▼ to select 2 Press “Setup” menu, then press ▶. Press ▲ or ▼ to select “Manual Ch Set”, then press ▶ or ENTER. Manual Ch Set menu will appear. ▲ or ▼ to select 3 Press the channel that you want to skip, then press ENTER.
TV operation turn on the TV, press POWER. 1 To(POWER indicator on the front of the unit blinks while starting. It may take approx. 15 seconds for a picture to appear on screen.) Press TV/DVD to select TV mode. the volume level 2 Adjust by pressing VOL + or – . The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases.
TV operation To select the video input source Press INPUT SELECT to view a signal from another device connected to your LCD TV, such as a VCR or DVD player. You can select ANT, Composite, S-Video, Component or PC depending on which input jacks you used to connect your devices. CH / Press and release CH / . The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 16 and 17 “Memorizing channels”.
TV operation SLEEP The sleep timer allows you to set a time when the LCD TV automatically switches to standby. SETUP/TV MENU in the TV mode. The menu screen will 1 Press appear. ▲ or ▼ to select 2 Press “Feature” menu, then press ▶. Picture Off Advanced Video Menu Password Set Audio Setup ▲ or ▼ to select 3 Press “Sleep Timer”.
Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press DISPLAY. You can choose any seven characters to identify a channel. To create channel labels SETUP/TV MENU in the TV mode, then press ▲ or ▼ to 1 Press select “Setup” menu, then press ▶. ▲ or ▼ to select 2 Press “Channel Labels”, then press ▶ or ENTER. The “Channel Labels” menu will appear.
Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to “TV RATING” and “MPAA” if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register a password SETUP/TV MENU 1 Press in the TV mode. The menu screen will appear. Press ▲ or ▼ to select “Feature” menu, then press ▶.
Setting the V-Chip To set the V-Chip SETUP/TV MENU 1 Press in the TV mode. Press ▲ or ▼ to select “Feature” menu, then press ▶. Picture Off Advanced Video Menu Password Set Audio Setup ▲ or ▼ to select 2 Press “Parental Control”, then Sleep Timer Parental Control NTSC CC Off ATSC CC Off Digital Closed Caption Feature To Move To Select Menu To Exit Enter Enter Password press ▶ or ENTER. Use Number buttons (0-9) to enter your password. The Parental Control Menu appears.
Setting the V-Chip To change the password SETUP/TV MENU in the TV mode. The TV menu screen 1 Press will appear. ▲ or ▼ to select 2 Press “Feature” menu, then press ▶. Picture Setup press ▶ or ENTER.
Setting the V-Chip Downloading the additional V-Chip rating system As a supplement to the standard V-Chip rating system, your television will be able to download an additional rating system, if such a system becomes available in the future. To download the additional V-Chip rating system (when available) SETUP/TV MENU 1 Press in a digital channel. Press ▲ or ▼ to select “Feature” menu, then press ▶.
Closed Caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language. Generally, Closed Captions in English are transmitted on CC1 and Closed Captions in other languages are transmitted on CC2.
CC advanced When you have selected Custom as the display method, you can adjust the various setting listed below as follows: This feature is designed to customize Digital Captions only. SETUP/TV MENU in the TV mode. The TV menu screen 1 Press will appear. ▲ or ▼ to select 2 Press “Feature” menu, then press ▶. Sleep Timer Picture Password Set Parental Control Audio then press ▶ or ENTER. The Digital Closed Caption menu will appear.
Setting the picture size You can view 480i and 480p format programs in a variety of picture sizes— Normal, Zoom, Wide and Cinema. Selecting the picture size SETUP/TV MENU 1 Press in the TV mode. Press ▲ or ▼ to select “Picture” menu, then press ▶. Picture Audio Setup ▲ or ▼ to select 2 Press “Picture Size”, then press ▶ or ENTER to select the desired picture size, as described below and on the next page.
Setting the picture size NOTE: • In COMPONENT mode with a scanning rate of 720p or 1080i, only the Normal and Cinema picture size features are available. • In PC mode, only the Normal and Wide picture size features are available. • In Cinema picture size, some of the on screen display items may be positioned off the visible portion of the screen.
Adjusting the picture preference/Picture control adjustment You can select four picture modes— Vivid, Standard, Movie and User—as described in the following table: Adjusting the picture preference SETUP/TV MENU in the 1 Press TV mode. Then press ▲ or ▼ to select “Picture” menu, then press ▶. Picture Audio Setup ▲ or ▼ to select “Picture 2 Press Mode”.
DNR/Selecting the color temperature DNR DNR (Digital Noise Reduction) can reduce the roughness of the picture. SETUP/TV MENU in the 1 Press TV mode. Then press ▲ or ▼ to select “Feature” menu, then press ▶. Picture press ▶ or ENTER.
Setting the 3D Y/C 3D Y/C reduces visible interference in your TV picture. This is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a video cassette or disc damaged by repeated use. SETUP/TV MENU 1 Press in the TV mode. Then press ▲ or ▼ to select “Feature” menu, then press ▶. Picture then press ▶ or ENTER. Audio Feature Picture Setup Press ▶ or ENTER to select “On” or “Off”.
Selecting Stereo/Second Audio Program (SAP)/ Sound control adjustment The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language or other audio information. When the TV receives a stereo or SAP broadcast, the word “Stereo” or “SAP” displays on-screen every time you turn the TV on, change the channel, or press DISPLAY. Selecting Stereo/Second Audio Program (SAP) SETUP/TV MENU in the 1 Press TV mode.
Selecting the audio language/ Selecting the digital output Selecting the audio language When two or more audio languages are included in a digital signal, you can select one of the audio language. SETUP/TV MENU 1 Press in the TV mode. Then press ▲ or ▼ to select “Audio” menu, then press ▶. Picture Setup ▲ or ▼ to select 2 Press “Audio Language”. Then press ▶ or ENTER to select your desired language.
Checking the Digital-signal strength/ Resetting your settings Checking the Digital-signal strength This TV will allow you to view the digital signal meter for digital channels. SETUP/TV MENU 1 Press in the TV mode. Then press ▲ or ▼ to select “Setup” menu, then press ▶. Picture Tuning Band Cable DTV Signal Auto Ch Search Audio Add On Ch Search Manual Ch Set Channel Labels Setup Menu Language English Reset ▲ or ▼ to select 2 Press “DTV Signal”.
Picture control adjustment in the Component and PC mode You can adjust to optimize the performance of the TV in the Component and PC mode. Example: Adjust the H-Pos in the component mode. INPUT SELECT repeatedly to select the component 1 Press mode. SETUP/TV MENU 2 Press during the component mode. Then press ▲ or ▼ to select “Feature” menu, then press ▶. Off Sleep Timer Picture Advanced Video Menu Component Set Audio Setup ▲ or ▼ to select 3 Press “Component Set”, then press ▶ or ENTER.
Preparation/Status display of disc The following pages describe the setup/operation in DVD mode. Preparation Before DVD/CD operation, please make the following preparations. the AC cord plug into a standard 120V 60Hz polarized 1 Insert AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER. NOTE: When connecting to other equipment, unplug the unit from the AC outlet. POWER on the unit or on the remote control to turn on 2 Press the unit.
Playback procedure 1 Press TV/DVD to select DVD mode. the disc in the disc 2 Place slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. On the screen, “ ” changes to 3 “Reading” and then playback will commence. • A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press ▲, ▼, ◀, ▶ or ENTER to operate a menu feature.
Special playback NOTE: There may be a slight delay between when you press the button and the function activating. Fast Forward Playback Press SEARCH during normal playback. Each press of SEARCH will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY. Review Playback Press SEARCH during normal playback. Each press of SEARCH will increase the speed of the search (x 2), (x 4), (x 8), (x 15).
MP3/WMA/JPEG and Audio CD playback This player can play back MP3/WMA/ JPEG-data which has been recorded on CD-R or CD-RW. To produce MP3/WMA/ JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/ JPEG-encoding software (not supplied). The Apple-HFS-System cannot be played. MP3/WMA/JPEG CD information Limitations on MP3/WMA/JPEG CD playback • MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digit extension letters, “mp3”, “wma”, “jpg”.
MP3/WMA/JPEG and Audio CD playback the file browser, press▲/▼ to 1 Inselect the desired JPEG file. (continued) /Picture-01.JPG Picture-01 Select Files Picture-02 Repeat :Off To display a thumbnail list, press Picture-03 Mode :Off DVD MENU. Picture-04 Picture-05 Press ▲/▼/◀/▶ to select the Picture-06 JPEG Preview desired file. Picture-07 Picture-08 (To return to the file browser, press TOP MENU.
Setting the JPEG interval You can continuously play back all JPEG files automatically. SETUP/TV MENU in the stop mode. 1 Press option, then press ◀/▶ or ENTER. Press ▲ or ▼ to select ▲ or ▼ to select “JPEG 2 Press Interval”, then press ▶ or ENTER. ▲ or ▼ to select your 3 Press desired time, then press ENTER.
Program playback (CD) You can arrange the order of tracks on the disc. the file browser, press 1 In▲/▼/◀/▶ to select “Edit Mode”, then press ENTER. When “Edit Mode” is black color, you can mark the files which you want to add into Program list. Press ▲/▼/◀/▶ to select the file 2 you want to add into the program list. Press ENTER. Selected file was marked. Repeat this procedure to select the other files. Press ▲/▼/◀/▶ to select “Add To 3 Program”. Then press ENTER.
Repeat playback (CD)/Random playback (CD) Repeat playback the file browser, press 1 In▲/▼/◀/▶ to select “Repeat” during stop mode. Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 WMA-3 ENTER repeatedly to 2 Press select “Track” or “All”. Folder-1 Folder-2 MP3-1 MP3-2 MP3-3 WMA-1 WMA-2 WMA-3 Select Files Repeat :Off Mode :Off JPEG Preview Select Files Repeat :Track Mode :Off JPEG Preview PLAY. 3 Press The unit automatically starts repeat playback after finishing the current track.
Zooming/Locating desired scene Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. ZOOM during playback. 1 Press The center part of the image will 1 be zoomed in. Each press of ZOOM will change the ZOOM magnification 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). Press ▲/▼/◀/▶ to view a different part of the frame. 2 You may move the frame from the center position UP, DOWN, LEFT or RIGHT. 3 Inviewthe( zoomOff).
Repeat playback Title, Chapter, Track Playback 1 Press PLAY MODE during playback or stop mode. ENTER repeatedly to 2 Press select “Chapter” or “Title”. Play Mode The unit automatically starts repeat playback after finishing the current title or chapter. Repeat : Off • If you set the repeat mode during stop mode, press PLAY to start Repeat playback. 3 Press PLAY MODE again to make the screen disappear. • Press PLAY to start Repeat playback. • To resume normal playback, select Repeat “Off” in step 2.
Marking desired scenes The TV/DVD stores the points that you want to watch again. You can resume playback from that scene. Marking the Scenes 1 Press MARKER during playback. the blank Marker using ▲ 2 Select or ▼, then press ENTER at the desired scene. Marker 1 Marker 2 Marker 3 Marker 1 Marker 2 Marker 3 00 27 54 • Up to 3 scenes can be selected. • Repeat this procedure to set the other 2 scenes. 3 Press MARKER to remove this display.
Changing soundtrack language/Subtitles Changing soundtrack language You can select the language when you play a multilingual disc. 1 Press AUDIO during playback. The current soundtrack language will appear. AUDIO repeatedly until the 2 Press desired language is selected. 1/2 Eng Dolby Digital Off The on-screen display will disappear after a few seconds. The on-screen display will disappear after a few seconds.
Changing angles/Title selection/DVD menu Changing angles When playing back a disc recorded with multi-angle facility, you can change the view angle. 1 Press ANGLE during playback. 1/2 The current angle will appear. 2 Press ANGLE repeatedly until the desired angle is selected. Title selection Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. TOP MENU during playback. 1 Press Title menu appears on the screen.
Setting the language You can select the language of “Menu”, “Subtitle” and “Audio” if more than one languages are recorded onto the disc. SETUP/TV MENU in the stop mode. 1 Press Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. ▲ or ▼ to select desired 2 Press option, then press ▶ or ENTER. Menu ▲ or ▼ to select your 3 Press desired language (e.g. English).
Setting the aspect ratio of TV screen/Setting on screen display Setting the aspect ratio of TV screen You can select the aspect ratio of the picture. SETUP/TV MENU in the stop mode or No Disc. 1 Press Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. ▲ or ▼ to select “TV 2 Press Screen”, then press ▶ or ENTER. ▲ or ▼ to select your 3 Press desired screen type, then press ENTER.
Setting the picture mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Setting the picture mode SETUP/TV MENU in the stop mode. 1 Press Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. ▲ or ▼ to select “Picture 2 Press Mode”, then press ▶ or ENTER.
Night Mode/Digital Out Night Mode Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment. SETUP/TV MENU in the stop mode or No Disc. 1 Press Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. ▲ or ▼ to select “Night 2 Press Mode”, then press ▶ or ENTER. ▲ or ▼ to select “On” or 3 Press “Off”, then press ENTER. On : Loud sound such as explosion or similar is toned down slightly when play back.
Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. SETUP/TV MENU in the stop mode or No Disc. 1 Press Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. ▲ or ▼ to select “Parental”, 2 Press then press ▶ or ENTER. “Enter Password” screen will appear. “0000” using Number 3 Press buttons (0-9). (Please note, this pre-setting password of this unit). Then press ENTER. The parental level list will appear.
Setting the new password SETUP/TV MENU in the stop mode or No Disc. 1 Press Press ▲ or ▼ to select option, then press ◀/▶ or ENTER. ▲ or ▼ to select 2 Press “Password”, then press ▶ or ENTER. “Enter Current Password” screen will appear. Number buttons (0-9) 3 Press to enter the password you have stored. • If you input a wrong number, press CANCEL. Then press ENTER. “Enter New 4 Password” screen will appear. Press Number buttons (0–9) to input the new password.
Temporary disabling of rating level by DVD disc Some pre-recorded DVD discs may attempt to temporarily cancel the rating level that you have set. You will be given the option to allow or not allow the override. a DVD disc (see page 1 Load 39). the DVD disc has been designed to temporarily cancel the 2 IfRating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with ENTER key, password input screen will then appear.
Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 51).
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.
Connections to other equipment (continued) To connect the TV/DVD to a PC (Personal Computer) Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the TV/DVD. Attach the connectors firmly with the screws on the plug.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER TV/DVD does not operate. • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in. 12 TV BROADCAST RECEPTION Poor sound or no sound.
Problems and troubleshooting SYMPTOMS (continued) POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 39 8 8 No picture. • TV/DVD selector is not set correctly. 38 No sound. • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. – 40 60 Picture is distorted during CUE or REVIEW.
Specifications GENERAL Power supply: Power consumption: Weight: Dimensions: Operating temperature: Operating humidity: TELEVISION Type: Display method: Number of Pixels: Viewing angle: Tuner type: Receiving channels: Input: Digital audio out: Component video input: PC Monitor input: Antenna input: Speaker: Audio output power: DVD/CD player Signal system: Applicable disc: Pickup: ACCESSORIES: AC 120V 60Hz Operation: 60W Stand by: 1W 6.6 kg (14.
limited WARRANTY 19” TFT LCD TV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 90 days from date of original purchase in the United States.
Memo .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. ............
J5Z90101A SH 07/10 N 5Z90101A.indd 68 Printed in Thailand 07.9.
