Manual

Picturecontrol adjustment inthe Component and PC mode
You can adjust to optimize the
performance of the TV in the
Component and PC mode.
Example: Adjust the H-Pos in the component mode.
Press INPUT SELECT repeatedly to select the component
mode.
Press SETUP/TV MENU
during the component
mode. Then press • or •
to select "Feature" menu,
then press •.
Press • or • to select
"Component Set", then
press • or ENTER.
Press 41or • to adjust
the setting.
• Press • or • to
change the adjusting
item.
NOTE:
• If no buttons are pressed for more
than approx. 30 seconds, the Menu-
screen will return to normal Monitor-
screen automatically.
• The "Component Set" and "PC Set"
settings are not effective for other
input modes.
H-Pos:
V-Pos:
Clock:
Phase:
Auto Adjust
(PC Setting only):
To adjust the horizontal position of the
image on the Component or PC mode.
To adjust the vertical position of the image
on the Component or PC mode.
To minimize any vertical bars or stripes
visible on the screen background.
This must be adjusted after the frequency
of the Component or PC mode has been
set to 60Hz to optimize picture quality
(page 61).
To optimize "H-Pos", "V-Pos", "Clock" and
"Phase" automatically.
Setting: To return your settings to the factory
settings.
Press SETUP/TV MENU to return to the normal screen.
37