Manual

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your

antenna system. If you are using a Cable TV service, see page 15 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna Antenna

jack

75 ohms

coaxial

cable

300-75 ohms

matching

transformer

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack.

If your combination VHF/UHF antenna has a 300

ohm twin-lead wire, the use of the 300-75 ohm

matching transformer may be necessary.

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna 300-75 ohms

ja;k matching

transformer

VHF 300 ohms

Connect the UHF 300 ohm twin-lead wire to

the Combiner (not supplied). Connect the VHF

300 ohm twin-lead wire to the 300-75 ohm

Matching Transformer. Attach the Transformer to

the Combiner, then attach the Combiner to the

Antenna Jack.

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna

jack

C___ ohms

Connect the VHF 75 ohm cable and UHF

300 ohm twin-lead wire to the Combiner (not

supplied). Attach the Combiner to the Antenna

Jack.