OWNER'S IfSANSUl MANUAL 19" TFT LCD DIGITAL TV WITH DVD PLAYER HDLCDVD190 V I D E O (_ DBJDOLeYI DIGITALAUDIO D | G | T A L 1.41 m| @_ Digital0ut HIGH-DEFINITION MULTIMEDIA 3ooo oooo oooo o_o u _ ................. c ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the CAUTION presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE SHOCK, RISK OF ELECTRIC DO NOT REMOVE (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus 6) Clean only with a clean dry cloth. 7) Do not block any ventilation 8) Do not install near any heat sources amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
IMPORTANTSAFETY INSTRUCTIONS(continued) EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA IN WIRE LEAD GROUND CLAMP ANTENNA DISCHARGE (NEC GROUND POWER ELECTRICAL 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) ELECTRIC SERVICE EQUIPMENT NEC-NATIONAL S2898A UNIT SECTION CODE CLAMPS SERVICE ELECTRODE (NEC ART GROUNDING SYSTEM 250, PART H) 20) When replacement parts are required, be sure the service technician uses replacement the manufacturer or those that have the s
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm (4 inches) free space around the entire unit. A 10cm \ J "v j A \ Notes when mounting the LCD TV/DVD on a wall • When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the LCD TV/DVD and the wall.
Featu res LCD color TV With DVD/CD player Unique space saving design combines a 19" LCD color TV and a DVD/CD player. A DVD disc has much more capacity, but is the same size as an audio CD disc.The Picture/Audio quality of a DVD exceeds other software. The picture quality is higher than Super VHS video cassettes. The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.
Contents IMPORTANT SAFETY INSTRUCTIONS ........... 3 SAFETY PRECAUTIONS ................................. 5 IMPORTANT NOTICE ....................................... 5 Features ............................................................ 6 Contents ........................................................... 7 Disc ................................................................... 8 Location of controls ........................................... 9 Remote control ............................................
Disc Playable discs Disc type and logo mark DVD Video v =o E o content Audio + Video (moving pictures) CD-DA Audio DIGITAL AUDIO The following discs are also available. • DVD-R/RW discs of DVD video format. • CD-R/RW discs of MP3/WMA/JPEG. CAUTION: • Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. • 8cm discs can be played directly. If an 8cm disc adapter is used it will cause errors.
Location of controls Top MENU button VO LCHMAEN+NE_uAt/c_ _ uttOns _'_ IN PU;obUwttE°Rbutton LAY button [_sKIp buttOn_ button EJECT _ Front P ..... 1 _ I .... indicat°r L°uds Ipeakers Remote sensor To display the menu screen. Press MENU button to display the menu screen, CHANNEL A/v buttons and VOLUME +/- buttons screen operations.
Location Right of controls (continued) side DISC slot Rear / / o HEADPHONE c CC] COMPONENT AUDIO IN jacks COMPONENT IN jacks PC AUDIO IN jack PC IN jack RF (ANT) AV IN jacks COAXIAL DIGITAL AUDIO OUT jack IN jack jack
Remote control Page POWER Power On/Off DISPLAY/- Call TV information Call DVD information Input "-" for digital channels TV/DVD Switch (EJECT) ®OO ©@@0* DISPLAY ®®®o ®®®O L MUTE SLEEP SETUP/®ODvD _MENU MENU CHA o.
Remote control Inserting 1 (continued) Batteries Open the battery compartment ,I cover in the direction of the arrow, Install two "AAA" batteries, paying attention to the polarity diagram in the battery compartment. Replace the compartment cover. ...... ---___/_ ....... Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within a 30 ° angle on either side of the remote sensor, up to a distance of approximately 15 feet.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond antenna system. If you are using a Cable TV service, see page 15 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead to your wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box, Some cable companies offer "premium pay channels" where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Select the language you prefer first, then proceed with the other menu options. To turn on the TV, press POWER. (POWER indicator on the front of the unit blinks while starting. It may take approx. 15 seconds for a picture to appear on screen.) 2 3 4 Press TV/DVD to select TV mode. Press SETUP/TV MENU. The menu screen will appear. Press • or • to select "Setup" i_.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. To use this TV with an antenna, set the Tuning Band menu option to the Air mode. When shipped from the factory, this menu option is in the Cable mode. Air/Cable selection Press SETUP/TV appear. MENU in the TV mode.
Memorizing channels Automatic channel Press SETUP/'rv appear. search MENU in the TV mode.The menu screen will Press • or • to select "Setup" menu, then press •. Press • or • to select "Auto Ch Search". Press • orENTER.The TV will begin memorizing all the channels available in your area. • It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels. • Depending on the reception condition, a BAR display may not advance for several minutes, please be patient.
Memorizing channels Manual Ch Set You can select the channel Press SETUP/TV that you want to skip. MENU in the TV mode.The menu screen will appear. Press • or • to select "Setup" menu, then press i_. Press • or • to select "Manual Ch Set", then press _,-or ENTER. Manual Ch Set menu will appear. Press • or • to select the channel that you want to skip, then press ENTER. Press SETUP/TV MENU to return to the normal screen.
TV operation To turn on the TV, press POWER. (POWER indicator on the front of the unit blinks while starting. may take approx. 15 seconds for a picture to appear on screen.) Press TV/DVD to select TV mode. 2 3 4 It Adjust the volume level by pressing VOL + or -. The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases.
TV operation To select the video input source Press INPUT SELECT to view a signal from another device connected to your LCD TV, such as a VCR or DVD player. You can select ANT, Composite, S-Video, Component or PC depending on which input jacks you used to connect your devices. CH ,,,,/v Press and release CH ^/V. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory.
TV operation SLEEP The sleep timer allows you to set a time when the LCD TV automatically switches to standby. Press SETUP/'rv appear. MENU in the TV mode.The menu screen will Press • or • to select "Feature" press ,. menu, then Press • or • to select "Sleep Timer". Press I_ or ENTER repeatedly to select the desired sleep time (Off, 15 min, 30 min, 45 min, 60 min, 90 min, 120 min, 180 min or 240 min). Press SETUP/'rv MENU to return to the normal screen.
Labeling channels Channel labels appear over the channel number display each time you turn on the TV, select a channel, or press DISPLAY. You can choose any seven characters to identify a channel. To create channel labels Press SETUP/TV MENU in the TV mode, then press • or • to select "Setup" menu, then press •. Press • or • to select "Channel Labels", then press • or ENTER. The "Channel Labels" menu will appear. 3 4 Press • or • to select a channel you want to label.
Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to "TV RATING" and "MPAA" if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register a password Press SETUP/TV MENU in the TV mode. The menu screen will appear. Press • or • to select "Feature" press •.
Setting the V-Chip To set the V-Chip Press SETUP/TV MENU in the TV mode. Press • or • to select "Feature" menu, then press _,-. 2 3 Press • or • to select "Parental Control", then press _,-or ENTER. Use Number buttons (0-9) to enter your password. The Parental Control Menu appears. Press • or • to select "US Ratings", then press _,-or ENTER. TV Rating NONE: TV Rating is not set TV-Y: All children TV-Y7: 7 years old and above TV-G: General audience To use the TV after the TV is protected.
Setting the V-Chip To change the password Press SETUP/'FV will appear. MENU in the TV mode.The TV menu screen Press • or • to select "Feature" menu, then press •. Press • or • to select "Password Set", then press • or ENTER. Use Number buttons (0-9) to enter your password. Enter a new password ........................ (0-9).using Number ' buttons Enter the same password again to confirm. The password is now registered. _ _ • _ • .............
Setting the V-Chip Downloading the additional V-Chip rating system As a supplement to the standard V-Chip rating system, your television will be able to download an additional rating system, if such a system becomes available in the future. To download the (when available) additional Press SETUP/TV V-Chip rating system MENU in a digital channel. Press • or • to select "Feature" menu, then press _. 2 3 Press • or • to select "Parental Control", then press _ or ENTER.
Closed Caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language. Generally, Closed Captions in English are transmitted on CCl and Closed Captions in other languages are transmitted on CC2.
CC advanced When you have selected Custom as the display method, you can adjust the various setting listed below as follows: This feature is designed Press SETUP/TV will appear. to customize MENU in theTV Digital Captions only. mode. The TV menu screen Press • or • to select "Feature" menu, then press •. Press • or • to select "Digital Closed Caption", then press • or ENTER. The Digital Closed Caption menu will appear. Press • or • to select "Style", then press • or ENTER to select "Custom".
Setting the picture size You can view 480i and 480p format programs in a variety of picture sizes-Normal, Zoom, Wide and Cinema. Selecting the picture size Press SETUP/TV MENU in the TV mode. Press • or • to select "Picture" menu, then press ,. Press • or • to select "Picture Size", then press _,-or ENTER to select the desired picture size, as described below and on the next page. Press SETUP/TV Normal picture MENU to return to the normal screen.
Setting the picture size NOTE: • In COMPONENT mode with a scanning rate of 720p or 1080i, only the Normal and Cinema picture size features are available. • In PC mode, onlythe Normal and Wide picture size features are available. • In Cinema picture size, some of the on screen display items may be positioned off the visible portion of the screen.
Adjusting the picture preference/Picture control adjustment You can select four picture modes-Vivid, Standard, Movie and User--as described in the following table: Adjusting the picture preference Press SETUP/TV MENU in the TV mode. Then press • or • to select "Picture" menu, then press •. Press • or • to select"Picture Mode". Press • or ENTER to select the item you want to adjust.
DNR/Selecting the color temperature DNR DNR (Digital Noise Reduction) picture. can reduce the roughness of the Press SETUP/TV MENU in the TV mode. Then press • or • to select "Feature" menu, then press •. Press • or • to select "Advanced Video Menu", then press • or ENTER. Press • or • to select"DNR". Press • or ENTER to select "On" or "Off". Press SETUP/TV ......................... MENU to return to the normal screen.
Setting the 3D Y/C 3D Y/C reduces visible interference in your TV picture, This is useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a video cassette or disc damaged by repeated use. Press SETUP/TV MENU in the TV mode. Then press • or • to select "Feature" menu, then press •. Press • or • to select "Advanced Video Menu", then press • or ENTER. Press • or • to select "3D Y/C". Press • or ENTER to select "On" or "Off".
Selecting Stereo/Second Audio Program Sound control adjustment The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also can transmit (SAP)/ Selecting Stereo/Second Audio Program (SAP) Press SETUP/TV MENU in the TV mode. Then press • or • a second audio program (SAP) containing a second language or other audio information.
Selecting the audio language/ Selecting the digital output Selecting the audio language When two or more audio languages are included you can select one of the audio language. in a digital signal, Press SETUP/TV MENU in the TV mode. Then press • or • to select "Audio" menu, then press i_. Press • or • to select "Audio Language". Then press • or ENTER to select your desired language. Press SETUP/TV MENU to return to the normal screen.
Checking Resetting the Digital-signal your settings strength/ Checking the Digital-signal strength This TV will allow you to view the digital channels. signal meter for digital Press SETUP/TV MENU in the TV mode. Then press • or • to select "Setup" menu, then press i_. Press • or • to select "DTV Signal". Press • or ENTER to check the Digital-signal strength. Press SETUP/'rv MENU to return to the normal screen.
Picture control adjustment in the Component and PC mode You can adjust to optimize the performance of the TV in the Component and PC mode. Example: Adjust the H-Pos in the component Press INPUT mode. SELECT repeatedly mode. to select the component Press SETUP/TV MENU during the component mode. Then press • or • to select "Feature" menu, then press •. Press • or • to select "Component Set", then press • or ENTER. Press 41or • to adjust the setting. • Press • or • to change the adjusting item.
Preparation/Status The following pages describe the setup/operation in DVD mode. display of disc Preparation Before DVD/CD operation, please make the following Insert the AC cord plug into a standard AC outlet. preparations. 120V 60Hz polarized • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER. NOTE: When connecting from the AC outlet.
Playback proced ure 1 2 3 Press TV/DVD to select DVD mode. Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. On the screen, ",_," changes to "Reading" and then playback will commence. • A menu screen may appear on the TV screen, if the disc has a menu feature. In this case, press &, v, _1, • or ENTER to operate a menu feature.
Special playback NOTE:There may be a slight delay between when you press the button and the function activating. Fast Forward Playback Press SEARCH I_" during normal playback. Each press of SEARCH _1_ will increase the speed of the search (x 2), _ (x 4), _ (x 8), _ (x 15). (CD: I_" (x 2), _ (x 4), _ (x 8), _ (x 20)) • To resume normal playback, press PLAY. Review Playback Press SEARCH 44 during normal playback.
MP3/WMA/JPEG This player can play back MP3/WMA/ JPEG-data which has been recorded on CD-R or CD-RW, To produce MP3/WMA/ JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/ JPEG-encoding software (not supplied), The Apple-HFS-System cannot be played. MP3/WMA/JPEG information MP3 CD/WMA and Audio CD playback Load a MP3/WMA/JPEG A file browser Operation CAUTION: • Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.
MP3/WMA/JPEG and Audio CD playback (continued) In the file browser, pressA/v to select the desired JPEG file. To display a thumbnail list, press DVD MENU. Press A/V/_I/D,- to select the desired file. (To return to the file browser, press TOP MENU.) When PLAY is pressed after displaying the file browser, or when the disc tray is closed by pressing PLAY, playback begins automatically starting from the first file. In this case, if the first file is a JPEG file, the first JPEG file is played back.
Setting the JPEG interval You can continuously play back all JPEG files automatically. Press SETUP/TV MENU in the stop mode. Press • or • to select _ option, then press 4/, 2 or ENTER. Press • or • to select'3PEG Display Picture Interval", then press - or ENTER. desired time, then press ENTER. _ : On Mode TVSeree, TVS :1e:9D 16:9 ...... Display Picture : Auto : On Mode :Auto Press • or • to select your Off: Plays back one file at a time. 5 Seconds: Plays back images intervals.
Program playback (CD) You can arrange on the disc. the order of tracks -t / In the file browser, press A/v/,/, to select "Edit Mode", then press ENTER. When "Edit Mode" is black color, you can mark the files which you want to add into Program list. 2 Press A/V/_I/D,- to select the file you want to add into the program list. Press ENTER. Selected marked. Repeat this procedure the other files. 3 file was to select Press A/V/_I/D,- to select "Add To Program". Then press ENTER.
Repeat playback (CD)/Random playback (CD) Repeat playback In the file browser, press A/V/_I/I,- to select "Repeat" during stop mode. Press ENTER repeatedly select "Track" or "All". Press PLAY. The unit automatically current track. To resume normal to starts repeat playback playback, select after finishing the Repeat :"Off" in step 2. Repeat :"Off" in step 2. Random playback In the file browser, press A/V/_I/I,- to select "Mode" during stop mode. Press ENTER to select "Random". Press PLAY.
Zooming/Locating desired scene Zooming This unit will allow you to zoom in on the frame image.You make selections by switching the position of the frame. can then PressZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM magnification O,,1 (x 1.3), O_2 (x 1.5) and O_ 3 (x 2.0). 2 3 Press •/v/_l/, to view a different part of the frame. You may move the frame from the center position UP, DOWN, LEFT or RIGHT.
Repeat playback Title, Chapter, Track Playback Press PLAY MODE during Press ENTER repeatedly playback or stop mode. to select "Chapter" or "Title". The unit automatically starts repeat playback after finishing current title or chapter. the • If you set the repeat mode during stop mode, press PLAY to start Repeat playback. 3 Press PLAY MODE again to make the screen disappear. • Press PLAY to start Repeat playback. • To resume normal playback, select Repeat "Off" in step 2.
Marking desired scenes The TV/DVD stores the points that you want to watch again.You can resume playback from that scene. Marking the Scenes Press MARKER during playback. [ [Marker1 Marker2 Marker3 [ Select the blank Marker using • or v, then press ENTER at the desired scene. : : : [Marker 1 Marker 2 00:27:54J : : Marker 3 : • Up to 3 scenes can be selected. • Repeat this procedure to set the other 2 scenes. Press MARKER Returning to the Press MARKER or stop mode. to remove this display.
Changing soundtrack language/Subtitles Changing soundtrack language You can select the language 1 Press AUDIOduring The current when you play a multilingual disc. playback. soundtrack language will appear. Press AUDIO repeatedly until the desired language is selected. The on-screen display will disappear after a few seconds. The on-screen display will disappear after a few seconds.
Changing angles/Title selection/DVD menu Changing angles When playing back a disc recorded change the view angle. Press ANGLE The current during with multi-angle facility, you can playback. angle will appear. Press ANGLE repeatedly until the desired angle is selected. Title selection Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title. Press TOP MENU during playback. Title menu appears on the screen.
Setting the language You can select the language of "Menu", "Subtitle" and "Audio" if more than one languages are recorded onto the disc, 1 Press SETUP/TV MENU in the stop mode. Press • or • to select @ option, then press
Settingthe aspect ratioof TV screen/Settingon screendisplay Setting the aspect ratio of TV screen You can select the aspect ratio of the picture. Press SETUP/TV MENU in the stop mode or No Disc. Press • or • to select _ option, then press 4/• or ENTER. 2 3 Press • or • to select "TV Screen", then press • or ENTER. Press • or • to select your desired screen type, then press ENTER.
Setting the picture mode There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second). Make this selection according to the type of content being viewed. Setting the picture mode Press SETUP/TV MENU in the stop mode. Press • or • to se ect _ option, then press 4/• or ENTER. Press • or • to select"Picture Mode", then press • or ENTER.
Night Mode/Digital Out Night Mode Night Mode enables you to control the dynamic achieve a suitable sound for your equipment. range so as to Press SETUP/TV MENU in the stop mode or No Disc. Press • or • to select (_ option, then press 4/I, or ENTER. 2 3 Press • or • to select "Night Mode", then press • or ENTER. Digital Out :PCM Press • or • to select "On" or "Off", then press ENTER. On : Loud sound such as explosion or similar is toned down slightly when play back.
Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. Press SETUP/TV MENU in the stop mode or No Disc. Press • or • to select _t option, then press ,/• or ENTER. Press • or • to select"Parental", then press • or ENTER. "Enter Password" screen will Password : Change appear. Press"0000" using Number buttons (0-9). (Please note, this pre-setting password of this unit). Then press ENTER. The parental level list will appear.
Setting the new password 1 2 3 Press SETUP/TV MENU in the stop mode or No Disc. Press • or • to select [_ option, then press ,/• or ENTER. Press • or • to select "Password", then press • or ENTER. "Enter Current Password" screen will appear. Parental : off Parental :O_ Press Number buttons (0-9) to enter the password you have stored. • If you input a wrong number, press CANCEL. Then press ENTER."Enter New Password" screen will appear. Press Number buttons (0-9) to input the new password.
Temporary disabling of rating level by DVD disc Some pre-recorded DVD discs may attempt to temporarily cancel the rating level that you have set. You will be given the option to allow or not allow the override. Load a DVD disc (see page 39). 2 3 If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the "Reading" screen will change, depending on which disc is played. If you select "YES" with ENTER key, password input screen will then appear.
Language code list Enter the appropriate Language Name code number for the initial settings "Menu", Code Language Name "Subtitle" Name and/or "Audio" (see page 51 ).
Connections to other equipment The exact arrangement you use to interconnect various video and audio components on the model and features of each component. Check the Owner's Manual provided the location of video and audio inputs and outputs. To connect the LCD TV/DVD to this unit is dependent with each component for to a VCR Rear of the unit VCR To AUDIO/VIDEO o _ r____q(_,_,,f-_,, _ _'-_-' To connect the IN To Audio/Video o +D OUT / 1 \\ _\\ Audio/Video cord (not supplied) \\ LCD TV/
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below. Rear of the unit ©© o 9_IZZ3 Subwoofer ,_Front Speaker_ / \ (Left) _.
Connections to other equipment (continued) To connect the TV/DVD to a PC (Personal Computer) Before you connect this TV/DVD to your PC, change the adjustment of your PC's Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the TV/DVD. Attach the connectors firmly with the screws on the plug.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. • SYMPTOMS I POSSIBLE with your TV/DVD. Consult SOLUTIONS your local I PAGE_ POWER TV/DVD does not operate. TV BROADCAST • Make sure the power cord is plugged in. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in.
Problems and troubleshooting SYMPTOMS I (continued) POSS,BLE SOLOT,ONS I PAGE" DVD • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 39 8 8 No picture. • TV/DVD selector is not set correctly. 38 No sound. • Checkthe input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. 40 60 Playback doesn't start. Picture is distorted CUE or REVIEW.
Specifications GENERAL Power supply: Power consumption: Operation: 60W Stand by: 1W 8.6 kg (14.6 Ibs) Weight: Dimensions: Operating Operating AC 120V 60Hz temperature: humidity: Width: 483 mm (19 inches) Height: 396 mm (15-9/16 inches) Depth: 190 mm (7-1/2 inches) 5°C _ 40°C Less than 80% TELEVISION Type: 18.
IJSANSUI® fimited WARRANTY LCD TV WITH DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship normal use and conditions for a period of 1 year from date of original purchase in the United States.
Memo
IIIIIIIIIIIIMHIIIIIIII J5Z90101A SH 07/10IN Printed in Thailand
