Owner's manual
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Connect the 75 ohm cable from the combination
Antenna Antenna VHF/UHF antenna to the antenna jack.
Jack Jack
If your combination VHF/UHF antenna has a 300
_1_ ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
Coaxial75ohm i 300-75 ohm
Cable Matching
Transformer
Combination VHF/UHF Antenna (Separate VI-IF and UHF 300 ohm twin-lead wires)
Connect the UHF 300 ohm twin-lead wire to
Antenna _ the Combiner (not supplied). Connect the VHF
Jack y 300 ohm twin-lead wire to the 300-75 ohm
Matching Transformer. Attach the Transformer to
P_°°I__'_'_' the Combiner, then attach the Combiner to the
Combiner _J_,l_ ___ Antenna Jack.
UHF 300 ohm t'JI VHF
300 ohm
300-75 ohm Matching Transformer
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Antenna
Jack
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the Combiner (not supplied). Attach
the Combiner to the Antenna Jack.
VHF 75 ohm
10