OWNER’S MANUAL 32" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER HDLCD3210 ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. Air/Cable MODE SELECTION When shipped from the factory, the Signal Type option is set to the “Cable” (Cable Television) mode. If not using Cable TV, set this menu option to the “Air” position.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS 19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Contents PREPARATIONS IMPORTANT SAFETY INSTRUCTIONS ........................................ 3 SAFETY PRECAUTIONS .............................................................. 5 Contents ........................................................................................ 6 Features......................................................................................... 7 Power source ................................................................................. 7 Parts and functions ................
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Parts and functions Front Side CHANNEL C/D buttons VOLUME +/– buttons MENU button INPUT button POWER button Remote sensor POWER indicator Red: Standby Green: On RF (ANT) IN jack VAR (VARIABLE) AUDIO OUT jacks COAXIAL DIGITAL AUDIO OUT jack HDMI-2 IN jack HDMI-1 IN jack Rear side PC MONITOR IN jack PC/HDMI-1 AUDIO jack AV1 IN jacks (VIDEO/S-VIDEO/AUDIO (L/R)) AUDIO (L/R) jacks (for COMPONENT IN and AV2 VIDEO IN) AV2 VIDEO IN jack COMPONENT IN jacks AC INPUT jack To display the menu screen.
Remote control 1 2 8 3 9 10 4 11 5 12 6 7 13 14 15 16 1.POWER Button - Used to turn the power on/off to the LCD TV. 2.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. 3.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 4.– Button -This button is the “–” button used when selecting digital channels. Also can display the current channel number when viewing the program. 5.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components.
Connections to other equipment To connect the LCD TV to a DVD player/Satellite receiver If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown. Left side of the LCD TV To S-VIDEO IN To S-Video OUT S-Video cord (not supplied) Audio cord (not supplied) To Audio OUT To AV1 AUDIO (L/R) IN To connect the LCD TV to a DVD player with component video If your DVD player has component video out jacks, connect your LCD TV to a DVD player using a component video cord.
Connections to other equipment To connect the LCD TV to a DTV receiver/set-top box If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a component video cord.
Connections to other equipment To connect the LCD TV to a Game or a Camcorder The LCD TV can also be used as a TV device for many video games or camcorders. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You’ll need to consult each component’s Owner’s Manual for additional information.
Connections to other equipment To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page 26).
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Select the language you prefer first, then proceed with the other menu options. turn on the TV, press POWER. 1 To(POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.) 2 Press MENU. The menu screen will appear. Press ▲ or ▼ to select “Setup”, then press ▶ or 3 ENTER. 4 Press ▲ or ▼ to select “Language”.
Adding Channel Add/Delete If you find a new channel unregistered, you can add the new channel into the channel memory. Tune in the new channel. Adding Channel Add/Delete Clear All >> >> >> 1 2 Press MENU. The menu screen will appear. Press EXIT to return to the normal screen. Press ▲ or ▼ to select “Channel”, then press ▶ or 5 3 ENTER. ▲ or ▼ to select “Add/Delete”, then press ▶ 4 orPress TV operation ENTER. : Select Add/Delete Adding Channel Add/Delete Clear All 5 6 turn on the TV, press POWER.
NOTE: • If a channel with no broadcast is selected, the sound will automatically be muted. • It may take a few seconds for a digital channel picture to appear on screen after being selected. To select the video input source Press INPUT SELECT, then press ▲/▼ or corresponding Number buttons (0-6) to view a signal from another device connected to your LCD TV, such as a VCR or DVD player.
- , () @ / + = - SPACE 5 6 If the character which you desire appears, press ENTER. Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters. When you finish inputting the label name, press EXIT to return to the normal screen. Repeat steps 1-5 for other channel. You can assign a label to each channel.
Movie Rating G PG PG-13 R NC-17 X : Select ENTER:Set G PG PG-13 R 6 7 : All ages : Parental guidance : Parental guidance less than 13 years old : Under 17 years old parental guidance suggested NC-17 : 17 years old and above X : Adult only Press ▲/▼/◀/▶ to select the desired rating, then press ENTER. Press EXIT to return to the normal screen. V-Chip function is activated now. To use the TV after the TV is protected.
▲ or ▼ to select “Closed Caption”, then Press ▲ or ▼ to select “Analog Caption” or “Digital 4 Caption”. 3 Press press ▶ or ENTER. The Closed Caption menu will appear. When you select “Digital Caption”, you can choose from CS1, CS2, CS3, CS4, CS5 and CS6. ▲ or ▼ to select “Digital CC Preset”, then 4 Press press ◀ or ▶ to select “Custom”. ▲ or ▼ to select “CC Advanced”, then 5 Press press ▶ or ENTER. Caption. ▲ or ▼ to select the desired item, then 6 Press press ◀ or ▶ to change the setting.
Mode Sports Standard Movie Memory Picture Quality Bright and dynamic picture (factory-set) Standard picture quality (factory-set) Movie-like picture setting (factory-set) Your personal preferences (set by you; see “Picture control adjustment” below). your desired setting, press EXIT to return to 4 After the normal screen. Picture control adjustment MENU. Then press ▲ or ▼ to select 1 Press “Picture”, then press ▶ or ENTER. Press ▲ or ▼ to select “Picture Setting”, then 2 press ▶ or ENTER.
Cinema Wide1 picture size (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio. The top and bottom edges of the picture may be hidden. Cinema Wide2 picture size (for letter box programs) The entire picture is uniformly enlarged—it is stretched the same amount both wider and taller (retains its original proportion). The top and bottom edges of the picture may be hidden.
After adjusting, press ENTER to return to the PC Selecting Stereo/Second 6 Setting menu. Then continue to adjust the other items. 7 Press EXIT to return to the normal screen. NOTE: • If no buttons are pressed for more than approx. 60 seconds, the Menu-screen will return to normal Monitor-screen automatically. • The PC settings are not effective for other input modes. DNR DNR (Digital Noise Reduction) can reduce the roughness of the picture. (This function is available only for analog broadcast.
Selecting the HDMI audio input source When you use HDMI-1 AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from “HDMI” or “DVI”. 1 Press ▲ or ▼ to select “Audio”, then press ▶ or 2 ENTER. Press ▲ or ▼ to select “HDMI1 Audio”. 3 Press ◀ or ▶ to select “HDMI” or “DVI”. Press MENU. The menu screen will appear.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS TV does not operate. • • • • • Poor sound or no sound. • • • • Poor picture • or no picture. • • • Poor reception on some channels. • • • • Poor color or no color. • • • • • Picture wobbles or drifts. Digital broadcasting screen problem.
Specifications Power supply: AC 120 V 60 Hz Power consumption: Operation: 170 W Stand by: 1 W Weight: 29.1 lbs (13.2 kg) Dimensions: Width: 31-3/8 inches (796.5 mm) Height: 22-7/8 inches (581 mm) Depth: 11-1/8 inches (282 mm) Inputs: 1 V (p-p)/75 ohms –8 dBm/50k ohms Y: 1 V (p-p), 75 ohms C: 0.286 V (p-p), 75 ohms Y: 1 V (p-p), 75 ohms PR: 0.7 V (p-p), 75 ohms PB: 0.
LIMITED WARRANTY 32” WIDE LCD TELEVISION ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States.
Memo .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. .................................................................................................. ............
J34D0101A SH 08/01 N 34D0101A_eng.
