OWNER'S SAN SUI® MANUAL 32" WIDE TFT LOB TELEVISION WITH DIGITAL TUNER LC 3 iNlii:::ilrrlll DIGITAL oocc o o o c oooc oooc _.-------J_ .................................................................................... t_----_, If you purchase a universal remote control from your local retailer, please contact the remote I manufac- ATTENTION turer for the required hen shipped programming from the factory, 1 code.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
I PO NT SAFETY iNSTRUCTiONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Followall instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS 19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSl/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
I PORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture wilt form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Contents I PREPARATIONS IMPORTANT SAFETY INSTRUCTIONS ........................................ SAFETY PRECAUTIONS .............................................................. Contents ........................................................................................ Features ......................................................................................... Power source ................................................................................. Parts and functions .......................
Features • integrated Digital Tuner =You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode = Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control =The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Parts and functions Top CHANNEL A/T buttons VOLUME +/- buttons MENU button INPUT button POWER button To display the menu screen. Press MENU button to display the menu screen. CHANNEL A/T buttons and VOLUME +/- buttons can be used to select the desired setting during the menu screen operations. Remote sensor POWER indicator AUDIO OUT jack Red: Standby COAXIAL DIGITAL Green: On AVl IN jacks t_i? (It alternately blinks to red and green while starting.
Remote control 1 2 8 3 9 10 4 11 5 12 6 13 14 6.OH (CHANNEL) +/-/CURSOR A / T Buttons = Used to operate the menu functions of the LCD TV, and to change the channels of the LCD TV. 7. MENU Button =Use to display the On-Screen menu function. 8. MUTE Button =To turn off the sound, press this button once. The LCD TV will be silenced and the symbol "Mute" will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) + or - buttons. 1.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna Antenna Jack (Single 75 ohm cable or 300 ohm twin=lead to your wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer "premium pay channels" where the signal is scrambled. Descrambiing these signals for normal viewing requires the use of a descrambier device which is generally provided by the Cable TV company. FOR SUBSCRIBERS TO BASIC f CABLE '_ f_ 75 ohm Coaxial Cable %.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components.
Connections to other equipment To connect the LCD TV to a DVD player/Satellite receiver If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
Connections to other equipment To connect the LCD TV to a DTV receiver/set=top If you connect a DTV receiver/set-top component video cord.
Connections to other equipment To connect the LCD TV to a Game or a Camcorder The LCD TV can also be used as a TV device for many video games or camcorders. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information. Left side of the LCD TV /'_(_4 To AVl VIDEO/AUDIO .
Connections to other equipment To connect the LCD TV to a PC (Personal Computer) Before you connect this LCD TV to your PC, change the adjustment of your PC's Resolution and Refresh rate (60 Hz). Connect one end of a (mate to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the LCD TV. Attach the connectors firmly with the screws on the plug.
Setting the language Press _ or ENTER to select "Air" or "Cable". You can choose from three different languages (English, French and Spanish) for the on=screen displays. Select the language you prefer first, then proceed with the other menu options. To turn on the TV, press POWER. (POWER indicator on the front of the unit blinks while starting. It may take approx. 15 seconds for a picture to appear on screen.) Press MENU. The menu screen will appear. Press MENU to return to the normal screen.
2 3 3 Press _ or ENTER. The TV will begin searching only blank, unregistered channels. • It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels. Depending on the reception condition, a BAR display may not advance for several minutes, please be patient. NOTE: Memorizing channels is best accomplished during evening "PRIMETIME" hours, as more stations are broadcasting digital signals.
CH +/Press and release CH+/-. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See "Memorizing channels" on pages 17 and 18. SLEEP The sleep timer allows you to set a time when the LCD TV automatically switches to standby. Press MENU.The Press A or T to select"Feature" press _. DISPLAY Press DISPLAY to display the current information on the screen.
To set the V-Chip Press MENU. Press A or T to select "Feature" menu, then press _. The characters rotation as follows: C-.2z 7,c2 Press A or T to select "Parental Control", then press _ or ENTER. Use Number buttons (0=9) to enter your password. The Parental Control Menu appears. If the character which you desire appears, press Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.
To change the password 1 2 3 4 5 6 Press MENU. The TV menu screen will appear. Press A or T to select "Feature" menu, then press _. Press A or T to select "Password Set", then press or ENTER. Use Number buttons password. (0=9) to enter your Enter a new password using Number buttons (0=9). Enter the same password again to confirm. The password is now registered.
NOTE: • If the program or video you selected is not closedcaptioned, no captions will display on-screen. If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set the Closed Caption feature to "Off". When selecting Closed Captions, the captioning will be delayed approx. 10 seconds. If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
Wide picture size (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio. Mode Vivid Standard Movie User The top and bottom edges of the picture may be hidden. Picture Quality Bright and dynamic picture (factory-set) Standard picture quality (factory-set) Movie-like picture setting (factory-set) Your personal preferences (set by you; see "Picture control adjustment" below).
DNR 1 DNR (Digital Noise Reduction) roughness of the picture. can reduce the Press MENU. Then press A or T to select "Feature" menu, then press _,-. Press A or T to select"Advanced then press _,-or ENTER. Press A or • to select"DNR'. to select "On" or "Off". 2 3 Press MENU. Then press A or T to select "Feature" menu, then press _. Press A or T to select "Advanced Video Menu", then press _ or ENTER. Press A or T to select "3D Y/C'. Press _ or ENTER to select "On" or "Off".
Sound control adjustment 1 2 1 2 Press MENU. Then press A or T to select "Audio" menu, then press _. Press MENU. Then press A or T to select "Audio" menu, then press _. Press ,_ or T to select "Digital Audio Output", then press _,-or ENTER to select "PCM" or "RAW". Press A or T to select the item you want to adjust, then press _ or ENTER. Press MENU to return to the normal screen. Bass: Press _ or _ to adjust the bass sound. Treble: Press 4 or _ to adjust the treble sound.
Press D,-or ENTER to return your settings to the factory settings. Press MENU to return to the normal screen. NOTE: • You also can reset the settings by pressing RESET when "Setup" menu is selected. Picture control adjustment in the Component and PC mode You can adjust to optimize the performance the TV in the Component and PC mode. of Example: Adjust the H-Pos in the component mode. Press INPUT SELECT repeatedly to select the component mode. Press MENU during the component mode.
Reception disturbances Most types of television UHF antenna. Outdoor interference are shown system, the disturbance interference can be remedied by adjusting the height and position of the VHF/ antennas are recommended for best results. The most common types of television below. If one of these symptoms appear when the TV is connected to a Cable TV may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. rSYMPTOMS POSSIBLE TV does not operate. SYMPTOMS Station or CABLE experiencing problems, tune to another station. Check sound adjustments (Volume and Mute). Check for sources of possible interference.
Specifications Power supply: AC 120 V 60 Hz Power consumption: Operation: Stand by: Weight: 31.1 Ibs (14.1 kg) Dimensions: Width: Height: Depth: Inputs: VIDEO: AUDIO: S-VIDEO: COMPONENT: 170 W 1W 32-3/8 inches (822 mm) 23-3/4 inches (604 mm) 11-1/8 inches (282.5 mm) 1 V (p-p)/75 ohms -8 dBm/50k ohms Y: 1 V (p-p), 75 ohms C: 0.286 V (p-p), 75 ohms Y: 1 V (p-p), 75 ohms PR: 0.7V (p-p), 75 ohms PB: 0.7V (p-p), 75 ohms Digital audio out: 0.
f,f SANSUI LIMITED WARRANTY 32" WIDE LCD TELEVISION ORLON warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States.
IIIIIIINIINIlUIIIIIIIlll J34K0101A SH 07/10 []
