OWNER'S If SAN SU MANUAL 32" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER LC H DIGITAL r I oo o o so o o :_o o o :_ooo If you purchase a universal remote control from your local retailer, please contact I the remote ATTENTION manufacturer for the required programming _.m TV/CABLE When shipped :d:Jf from the factory, n:i:usingCabl:TV, se 11 code. MODE SELECTION the TV/CABLE 7 menu option is set to the "CABLE" his menu option to the "TV" position__ (Cable Television)| ............
A cAo,,o. /k A CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: CAUTION: presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
I NT SAFETY I STRUCTI 1 Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
! PORTANT SAFETY INSTRUCTIONS 19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSl/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connecti
! PORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
Contents i PREPARATIONS IMPORTANT SAFETY INSTRUCTIONS ....................................... SAFETY PRECAUTIONS ............................................................. Contents ........................................................................................ Features ........................................................................................ Power source ................................................................................ Parts and functions ...........................
Features • • • • • • • • • Integrated Digital Tuner - You can view digital broadcasting without using a Digital TV Set-Top Box. Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Parts and functions Top MENU button CHANNEL A/V buttons \ VOLUME +/- butt°nsx _ I INPUT button / / /POWER To display the menu screen. Press MENU button to display the menu screen. CHANNEL A!V buttons and VOLUME +/buttons can be used to select the desired button setting during the menu screen operations.
Remote control 8 9 10 4 11 5 12 6 13 14 15 16 1. POWER Button = Used to turn the LCD TV. 2. SLEEP Button =To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. 3. Direct Channel Selection Buttons (0-9) =Allows direct access to any channel of the LCD TV. 4.- Button =This button is the "-" button used when selecting digital channels. 5. RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions. 6.
Antenna connections If you are using an indoor or outdoor antenna, followthe instructions belowthat correspond to your antenna system, if you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead Antenna Jack wire) Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer "premium pay channels" where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components.
Connections to other equipment To connect the LCD TV to a DVD player/Satellite receiver If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
Connections to other equipment To connect the LCD TV to a DTV receiver/set-top box If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top nent video cord. box using a compo- Left side of the LCD TV f_ To COMPONENT IN __ I ..........................
Connections to other equipment Using an AV Amplifier with built-in digital surround if you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built=in Dolby Digital decoder, or etc. as shown below.
Connections to other equipment To connect the LCD TV to a Game The LCD TV can also be used as a TV device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.
Setting the language You can choose from three different languages (English, French and Spanish) for the on=screen displays. On-screen language selection (step 3) will automatically appear on the screen when you press MENU initially. Select the language you prefer first, then proceed with the other menu options. 1 2 Press MENU. The menu screen will appear. Press 4 or _ to select (SETUP) menu.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. To use this TV with an antenna, set the TV/CABLE menu option to the TV mode. When shipped from the factory, this menu option is in the CABLE mode. TV/CABLE selection Press MENU. 2 The menu screen will appear. Press 41or _ to select (SETUP) menu.
Memorizing channels Automatic memory tuning Press MENU. The menu screen will appear. 2 Press 4 or I_ to select (SETUP) menu, then press A or V to select "AUTO CH MEMORY". SETUP LANGUAGE ENGLISH TV/CABLE CABLE ADD/DELETE _' A_" _ :SELECT Press _ or I_.The TV will begin memorizing all the channels available in your area. AUTO CH :ADJUST MEMORY \\ / PROGRAMMING PLEASE / NOW WAIT It may take from 15 minutes to II 30 minutes to complete memorizing digital cable channels.
TV operation 1 2 3 4 To turn on the TV, press POWER. Adjust the volume level by pressing VOL + or -. The volume level will be indicated on the screen by white bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of white bars also decreases. Set the TV/CABLE menu option to the appropriate position (see page 18). Press the Direct Channel Selection (0=9,-) buttons to select the channel.
TV operation CH A/V Press and release CH A or V. The channel automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See pages 18 and 19 "Memorizing channels". CABLE ANALOG ANT ABCD 1 2 DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear.
Labeling channels Channel labels appear over the channel number display each time you turn on theTV, select a channel, or press DISPLAY. You can choose any four charac= ters to identify a channel. To create channel "t ! labels Select a channel you want to label. O ,K_ Press MENU, then press 4 or _, to select (OPTION) menu. Press A or V to select "CH LABEL:', then press _ or _. The CH LABEL menu will appear. 3 Press A or V to select "SET/ CLEAR". Press 4 or _ to select "SET".
Selectingthe videoinputsource/Labeling the videoinputsource Selecting the video input source Press iNPUT SELECT to view a signal from another device connected to your LCD TV, such as a VCR or DVD player. You can select ANT, VIDEO1, VIDEO2, COMPONENT, HDMI 1, HDMI 2, or PC depending on which input jacks you used to connect your devices. SOURCE SELECTION 1:VIDEO1 2:VIDEO2 3:COMPONENT 4:HDMI1 5:HDMI2 6:PC [0-6] : SELECT Pressing iNPUT SELECT on the remote control displays the current signal source.
Setting the V-Chip An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to "TV RATING" and "MOVIE RATING" if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register a password Press MENU. The menu screen will appear. Then press _l or _ to select (LOCKS) menu.
Setting the V-Chip To set the V-Chip Press MENU. Then press 4 or I!_to select _ (LOCKS) menu. 2 .... Press A or V to display the password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. LOCKS V-CmPPASSWORD SET NEW LOCKS [o-_] : SELECT 3 ENTER : SET EXIT : END Press A or V to select "V-CHIP SET", then press 4 or _-. The VCHIP SET menu appears. LOCKS V-CHIP OFF V-CHIP S_T (OTV) NEW PASSWORD 4 To use theTV after theTV is protected.
Setting the V-Chip To change the password Press IVIENU.TheTV menu screen will appear. 2 Press _ or II_ to select _ ..... (LOCKS) menu. LOCKS V-CHIP SET NEW PASSWORD _.V 3 Press A or V to display the password entering mode. Use Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. Press A or V to select "NEW PASSWORD", then press 4 or _.
Closed WHAT IS CLOSED Caption CAPTiONiNG? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language. Generally, Closed Captions in English are transmitted on C1 and Closed Captions in other languages are transmitted on C2.
CC advanced Closed Captions are factory preset however you can adjust them individually as follows: This feature is designed to customize Digital Captions only. Press MENU. The menu screen will appear. 2 Press 4 or _ to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE CH AUTO MEMORY _ABLE ADD/DELETE T A'_ 3 Press A or V to select "CC ADVANCED", then press 4or_. The CC ADVANCED menu will appear.
Setting the picture size You can view 480i and 480p format programs in a variety of picture sizes--NATURAL, CINEMA WIDE1, CINEMA WIDE2, CINEMA WIDE3, and FULL. Selecting the picture size Press MENU. Press 4 or _ to select _ (SETUP) menu. Press A or V to select "PICTURE SIZE". SETUP CINEMA MODE ASPECT SIGNAL METER AUTO SHUT OFF 2 Press 4 or _,. The PICTURE SIZE menu will appear.
Setting the picture NOTES: • In HDMI or COMPONENT mode of scanning rate: 720p and 1080i, the PICTUIRE SIZE feature is available only for CINEMA WIDE2 and FULL. The PICTURE SIZE feature is in the PC mode only for NATURAL or FULL. size CINEMA WIDE2 picture size (for letter box programs) The entire picture is uniformly enlarged--it is stretched the same amount both wider and taller (retains its original proportion). The top and bottom edges of the picture may be hidden.
Setting the picture scroll You can scrol the picture in CINEMA WIDE2 and CINEMA WIDE3 1 2 Press MENU in CINEMA WIDE2 or CINEMA WIDE3 mode. Then press 4 or _ to select (SETUP) menu. SETUP LANGUAGE TV/CABLE AUTO CH ADD/DELETE V ENGLISH _ABLE MEMORY Press A or V to select "PICTURE SCROLl". _ICTURE SIZE CINEMA ASPECT MODE SIGNAL AUTO METER SHUT OFF FILM OFF OFF Press 41or I_ to display the SCROLL ADJUSTMENT mode. Press A or V to adjust the vertical position of the picture.
Selecting the cinema mode/Using the aspect feature Selecting the cinema mode A smoother motion may be obtained by setting the Picture Mode to Film when you view a DVD from the DVD player connected with the component input. Press MENU, then press 4 or I_ to select _ (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLECH MEMORY AUTO ADD/DELETE 2 _ABLE Press A or V to select CINEMA MODE, then press 4 or t_ to select "FILM".
Adjustingthe picturepreference/Picturecontroladjustment You can select four picture modes--SPORTS, STANDARD, MOVIE, and MEMORY--as described in the following table: Adjusting the picture preference Press MENU, then press 4 or to select (PICTURE) menu. PICTURE PICTURE PREFERENCE SPORTS BRIGHTNESS CONTRAST 25 50 COLOR 25 TINT SHARPNESS 2 50 T _v :SELECT 4_ :ADJUST Press A or V to select "PICTURE PREFERENCE".
Selecting the color temperature/ Adjusting the back lighting Selecting the color temperature Change the picture quality by selecting from three preset color temperatures=COOL, MEDIUM, and WARM: Press MENU, then press 4 or to select (PICTURE) menu. PICTURE PICTURE SPORTS 25 50 25 0 SHARPNESS 25 A_" 2 PREFERENCE BRIGHTNESS CONTRAST COLOR TINT :SELECT _b- :ADJUST _* :ADJUST Press A or V to select "COLOR TEMPERATURE". Press 4 or _ to select the mode you prefer.
Resetting your picture adjustments The RESET function returns your picture quality adjustments to the following factory settings: PICTUREPREFERENCE...... SPORTS BRIGHTNESS......................center (25) CONTRAST ............................max (50) COLOR ................................center (25) 1 TINT ..............................center (0) SHARPNESS..............center (25) COLORTEMPERATURE...COOL Press MENU, then press 4 or to select (PICTURE) menu.
Selecting Stereo/Second Audio Program (SAP)/ Sound control adjustment The multi=channel TV sound (WITS) feature provides high=fidelity stereo sound. WiTS also can transmit a second audio program (SAP) containing a second language or other audio informs= tion. When the TV receives a stereo or SAP broadcast, the word "STEREO" or "SAP" displays on= screen every time you turn theTV on, change the channel, or press DISPLAY.
Selecting the HDIVli audio input source/ Selecting the audio language Selecting the HDIVll audio input source When you use HDMI AUDIO IN jacks with HDMI or DVI device, you must select HDMI audio input source from "HDMF' or "DVI'. Press MENU.Then press _ or I_ to select (AUDIO) menu. AUDIO MTS BASS TREBLE BALANCE SURROUND STEREO 25 25 0 OFF v 2 Press A or V to select "HDMI 1", then press 4 or _ to select "HDMr' or "DVr'.
Selecting the digital output/ Resetting your audio adjustments Selecting the digital You can choose the format output of the digital Press MENU, then press 4 or to select (AUDIO) menu. audio output signal. '_ii_i_,_ • ....... _i/i_i_;!_,,_iiii! _:_iiii!_,_ii_ ¸ AUDIO MTS BASS TREBLE BALANCE SURROUND 2 STEREO 25 25 0 OFF Press A or V to select "DIGITAL OUTPUT", then press 4 or _ to select "PCM" or "DOLBY DIGITALS'. AUDIO _,,o'........ ;DO, Press EXiT to return to the normal screen.
Checking the Digital-signal strength This TV will allow you to view the digital signal meter for digital channels. 1 Press MENU, then press 4 or I_ to select (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLE AUTO CH ADD/DELETE MEMORY _ABLE T 2 Press A or V to select "SIGNAL METER". SETUP _ICTURE PICTURE CINEMA ASPECT AUTO SIZE SCROLL MODE SHUT OFF FILM OFF OFF Press 4 or P, to check the Digital-signal strength.
Setting the auto shut off in case of "AUTO SHUT OFF" feature is "ON", if a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes. 1 Press MENU, then press _ or to select _ (SETUP) menu. SETUP LANGUAGE ENGLISH TV/CABLECH MEMORY AUTO ADD/DELETE _ABLE T 2 Press A or V to select "AUTO SHUT OFF". ........ _ .... SETUP _ICTURE PICTURE CINEMA ASPECT SIGNAL 3 SIZE SCROLL MODE METER FILM OFF • Press 4 or _ to select "ON" or "OFF".
Picture/Audio control adjustment in the PC mode PC Monitor Menu There are a number of picture and audio settings you can adjust to optimize the performance of the TV in PC mode. Press iNPUT SELECT repeatedly to select PC mode. Press MENU.The PC Monitor Menu will appear. AUDIO Menu PICTURE Menu PICTURE BRIGHTNESS CONTRAST NOR POSITION VER POSITION PHASE CLOCK V NOTES: • If you wish to change the onscreen language, follow the steps 1 - 5 on page 17. • If no buttons are pressed for more than approx.
Picture/Audio control adjustment in the Resetting your picture/audio adjustment The RESET function returns your picture/audio following factory settings: PICTURE menu BRIGHTNESS ........... center CONTRAST ................. max RED ........................... center GREEN ..................... center BLUE ......................... center 1 2 NOTE: When you press RESET in (PICTURE) or (AUDIO) menu, the picture or audio adjustment returns to the factory preset level.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below, if one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. RADIO FREQUENCY iNTERFERENCE (RFI) installing an RFI filter may improve the picture.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer service outlet problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS TV does not operate. Poorsound or no sound. POSSIBLE SOLUTIONS POSSIBLE SOLUTIONS , Make sure the power cord is plugged in. , Try another AC outlet. , Power is off, check fuse or circuit breaker. , Unplug unit for an hour, then plug it back in.
Specifications Power supply: AC 120V 60 Hz Power consumption: Operation: Stand by: Weight: 31.1 Ibs (14.1 kg) Dimensions: Width: Height: Depth: Inputs: VIDEO: AUDIO: S-VIDEO: COMPONENT: 170 W 1W 32-3/8 inches (822 mm) 23-3/4 inches (604 mm) 11-1/8 inches (282.5 mm) 1 V (p-p)/75 ohms -8 dBm/50k ohms Y: 1 V (p-p), 75 ohms C: 0.286 V (p-p), 75 ohms Y: 1 V (p-p), 75 ohms PR: 0.7V (p-p), 75 ohms PB: 0.7V (p-p), 75 ohms Digital audio out: 0.
IJSANSUI LIMITED WARRANTY 32" WIDE LCD TELEVISION ORION warrants this product to be free from manufacturing defects in material and workmanship normal use and conditions for a period of 1 year from date of original purchase in the United States, under Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first 12 months from date of original purchase, ORLON will provide in-home repair service by an ORLON authorized Independent Service Center
Memo 47
Illllllllllllllllllllllllllllllllllll J32D0202A SH 07/05 [] Printed in Thailand
