Owner`s manual

Clear All
All channels are deleted from the channel memory.
] Select"Channel", then press • or ENTER.
2 Press • or • to select"Add/Delete", then press •
or ENTER.
3 Press • or • to select"Clear AIF, then press • or
ENTER.
Checking the digital-
signal strength
This TV will allow you to view the digital signal
meter for digital channels,
1 Select"Channel", then press • or ENTER.
2 Press • or • to select"DTV Signal".
3 Press • or ENTER to check the Digital-signal
strength.
The Digital-Signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
NOTE:
• Signal meter feature is not available for analog
channels.
• After 240 seconds, DTV Signal screen will return to
normal TV-operation automatically.
Labeling channels
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel,
To create channel labels
1 Select"Channel", then press • or ENTER.
2 Press • or • to select"Ch Label", then press •
or ENTER.
The "Ch Label" menu will appear.
3 Press 41or • to select a channel you want to
label, then press •.
4 Press 41or • repeatedly until the character you
want appears in the first space.
The characters rotation as follows:
r 0 "" "9 <-_>A i *;Zp.6_EE - " '()@/*=-_ ]
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
,_ When you finish inputting the label name, press
EXIT to return to the normal screen.
6 Repeat steps 3-4 for other channel.You can
assign a label to each channel.
To clear a Ch Label
After step 3 above, press • or • to select "Label
Clear", then press • or ENTER.
NOTE:
• The channel labels will be reset after "Automatic
Search" on page 18.
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
1 Select"Setup", then press • or ENTER.
2 Press • or • to select"Video Label", then press
• or ENTER.
3
4
Press • or • to select an input which you want to
label.
Press 4 or • to select the desired label for that
input source.
- : Uses the default label name
VCR :Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : HDMI device (only for HDMI inputs)
19