Owner`s manual

ManualsBrandsSansui ManualsTVHDLCD2612B

OWNER'S MANUAL

GUIDE D'UTILISATION

I/SANSUI

26" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER

TELEVISEUR GRAND ECRAN ACL TFT DE 26 pc AVEC

SYNTONISEUR NUMERIQUE

HDLCD2612B

.......................... DiGiTAL ]

F41 TM

HIGH-DEFINITION MULTIMEDIA iNTERFACE

I ATTENTION 1

ATTENTION

If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the

required programming code.

Si vous utiIisez avec cet appareil une tetecommande universelle (autre que celle vendue avec ce teteviseur),

consultez tadocumentation accompagnant Ia telecommande universelIe afin de connaTtre le code num6rique cor-

respondant au televiseur.

I AIR/CABLE MODE SELECTION 1

SELECTION DU MODE AIR/CABLE

When shipped from the factory, tile Signal Type option is set to the "Cable" (Cable Television) mode.

If not using Cable TV, set this menu option to the "Air" position.

Lorsque rappareil sort de I'usine, I'option ,, Signal Type _ est en mode _ Cable _ (c&blodistribution). Si vous

n'utilisez pas la c&blodistribution, selectionnez I'option ,, Air _.

f •

IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED

PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL

S'IL FAUT CONTACTER LE SERVICE CLIENT#LE, PRENEZ SOIN D'I_TRE MUNI

DU NUMC:RO DE MODELE AVANT D'APPELER.

CUSTOMER SERVICE - 1-800-289-0980

SERVICE/SERVICE CLIENT_:LE: 1-800-289-0980

ORLON WEBSITE

SITE WEB ORLON

FOR INFORMATION ON OUR OTHER PRODUCTS AND RECYCLING INFORMATION, PLEASEVISIT OUR WEBSITE AT

POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS ET LE RECYCLAGE,

VEUILLEZ VISITER NOTRE SITE WEB:

www.orionsalesinc.com

Before operating the unit, please read this manual thoroughly.

Avant de faire fonctionner I'appareil, veuillez lire le present guide attentivement.

Summary of content (25 pages)

PAGE 1
OWNER'S MANUAL GUIDE D'UTILISATION 26" WIDE I/SANSUI TFT LCD TELEVISION TELEVISEUR SYNTONISEUR GRAND ECRAN NUMERIQUE WITH DIGITAL TUNER ACL TFT DE 26 pc AVEC HDLCD2612B F41 .......................... DiGiTAL ] HIGH-DEFINITION TM MULTIMEDIA iNTERFACE ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.
PAGE 2
I=I_ [_ lq(,.")-" The lightning flash with arrowhead symbot, within an equilateral triangle is intended to alert the user to the CAUTION presence of uninsutated dangerous vottage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, The (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
PAGE 3
iMPORTANT SAFETY iNSTRUCTiONS 1) Read these instructions. 2) Keep these instructions. 3) Heed ailwarnings. 4) Follow ail instructions. 5) Do not use this apparatus near water. 6) Clean onlywith 7) Do not block any ventilation openings. Install in accordance with the manufacturer's 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21 ) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
PAGE 5
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.
PAGE 6
Featu res • Integrated Digital Tuner -You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
PAGE 7
Contents IMPORTANT SAFETY INSTRUCTIONS ........... 3 SAFETY PRECAUTIONS ................................. 5 Features ............................................................ 6 Power source .................................................... 6 Contents ........................................................... 7 Parts and functions ........................................... 8 Remote control ................................................. 9 Antenna connections ......................................
PAGE 8
Parts and functions Front Left side .-_ VOLUME .......CHANNEL +/- buttons A/V buttons MENU button INPUT/ENTER POWER ...... button button // I _ ..... I Rem°tesens°r I I_ POWER indicator Red: Standby Green: On Rear To display the menu screen. Press MENU button to display the menu screen. CHANNEL A/V buttons, VOLUME +/- buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations.
PAGE 9
Remote control POWER 1 2 _ISP[A ¥ SLEEP 6.CURSOR Alvl,l_,. the menu functions PICT_RESE£ 11 12 _ (Z) CD CD CD (i) 3 CDCD CE) CD CZ[) 4 13 --14 5-6-- 15 7 16 9-- 17 10 1. POWER Button the LCD TV. 2. DISPLAY the current screen. To press this - Used to turn the power on/off to Button - When you press this button, information will be displayed on a remove the display from the screen, button again. 3.
PAGE 10
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination to your VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack.
PAGE 11
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box, Some cable companies offer "premium pay channels" where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
PAGE 12
Connections to other equipment The exact arrangement you use to interconnect various video and audio components on the model and features of each component. Check the Owner's Manual provided the location of video and audio inputs and outputs.
PAGE 13
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Rear of the unit | I Subwoofer Fro nt _ r......L___ Speaker-_----/\ (Left) \\} TV 1 .
PAGE 14
Connections to other equipment To connect a HDMI or a DVI device to the (continued) unit The HDMI1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
PAGE 15
Starting setup The Starting Setup menu appears the first time you turn on the TV, and assists you to select the menu language, specify the Air/Cable setting, and program your channels automatically. IMPORTANT: TV system 1 r_ ,_ 3 Make sure that the antenna connection or cable is made! To turn on the TV, press POWER (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins.
PAGE 16
DISPLAY Press DISPLAY the screen. to display the current When theTV receives a digital information will appear. • Channel • • • • • number • • • • on signal, the digital • Station Channel label (if preset) V-Chip rating Sleep timer Program guide Resolution information Quick guide for menu operation Call menu and for example: 1 Press INPUT SELECT 2 Press MENU.TheTV Select Language. to select TV mode. menu screen will appear.
PAGE 17
Convenience functions You can change the default settings by pressing the Menu button on your remote, then select one of the icons at the top of the menu - follow the On-Screen prompts to set your preferences. Picture Picture Setting Brightness / Contrast / Sharpness / Color / Tint You can adjust the picture quality to your preference. Color Temperature Bluish (Cool) / Neutral (Standard) / Reddish (Warm) Backlight The Backlight feature adjusts the screen brightness for improved picture clarity.
PAGE 18
Memorizing 4 channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. To use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode. Air/Cable selection 1 "Channel", 2 3 4 Select then press • or ENTER.
PAGE 19
Clear All All channels ] 2 3 are deleted Select"Channel", from the channel memory. then press • or ENTER. Press • or • to select"Add/Delete", or ENTER. Press • or • to select"Clear ENTER. then press • 4 AIF, then press • or Press 41or • repeatedly until the character want appears in the first space.
PAGE 20
Setting the V-Chip Genre: ALL D L S V FV An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude. The restriction applies to "TV Rating" and "Movie Rating" if this data is transmitted. You may set this restriction separately. To use the V-Chip function, you must register a password. To register 1 2 Movie Rating a password Select"Lock", then press • or ENTER.
PAGE 21
3 4 5 6 7 Press • or • to select "V-Chip", then press • or • to select "On". Press • or • to select "V-Chip Set (DTV)", then press • or ENTER. Set your preferred content additional rating system. You also need "Update" rating information. procedure 4 Select "Lock", then press • or ENTER. Press • or • to select"V-Chip Clear", then press • or ENTER. The Password screen will appear. Use Number buttons (0-9) to enter your password, then press ENTER. All of your settings return to the factory settings.
PAGE 22
5 6 Press • or • to select "CC Advanced", press • or ENTER. The CC Advanced menu will appear. then Press • or • to select the desired item, then press • or • to change the setting. Cinema Wide1 (for 4:3 format programs) To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio. The top and bottom edges of the picture may be hidden. You can select from among the following and parameters.
PAGE 23
Reception d istu rbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
PAGE 24
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. rSYMPTOMS TV does POSSIBLE SOLUTIONS f'-SYMPTOMS not operate. • Unptug in. unit for an hour, then broadcasting screen ptug it back • Check sound adjustments (VOL Mute). • Check for sources of possibte interference. or no sound.
PAGE 25
Specifications GENERAL Power supply: AC 120V 60Hz Power consumption: Operation: 84 W Stand by: 0.3 W Weight: Dimensions: 9.5 kg (20.9 Ibs) Operating temperature: Operating humidity: Width: 663 mm (26-1/8 Height: 498 mm (19-5/8 Depth: 214 mm (8-7/16 5oc _ 40oC Less than 80% inches) inches) inches) Type: 26.01 inches (660.