Service manual

1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
(Refer to Fig. 1-3)
1. Turn up set and put the Front Cabi Ass'y of LCD
CAUTION
on the top.
Be careful not to remove the LVDS cable forcibly, because
2. Remove the Front Cabi Ass'y in the direction of
the LVDS cable may be damaged.
arrow (A).
3.
Disconnect the followin
g
connector:
(
CD2801
)
.
4. Remove the LCD Panel in the direction of arrow (B).
1-1: STAND ASS'Y
(
Refer to Fi
g
. 1-1
)
1.
Remove the 2 screws (1).
2.
Remove the Stand Ass'y in the direction of arrow
.
DISASSEMBLY INSTRUCTIONS
1-3: FRONT CABI ASS'Y and LCD PANEL
(1)
(1)
Fig. 1
-
1
Stand Ass'y
(A)
Front Cabi Ass'y
B1-1
1-2: COVER INVERTER
(
Refer to Fi
g
. 1-2
)
1. Remove the screw (1).
2. Remove the Cover Inverter in the direction of arrow.
3. Disconnect the following connectors:
(
CP7001 and CP7002
)
.
4. Remove the 2 screws (2)
5. Remove the 6 screws (3)
Fig.
1
1
(2)
(1)
Cover Inverter
Fig. 1-2
(3)
(2)
(3)
(3)
(3)
(3)
(3)
Fig. 1-3
Back Cabi Ass'y
(B)
LCD Panel
CD2801
(LVDS Cable)
B1-1