Manual

Picturecontrol adjustment inthe Component and PC mode
You can adjust to optimize the
performance of the TV in the
Component and PC mode.
Example: Adjust the H-Pos in the component mode.
Press iNPUT SELECT repeatedly to select the component
mode.
2
Press MENU during the
component mode. Then press
A or V to select "Feature"
menu, then press _.
Press A or V to select
"Component Set", then press
or ENTER.
Press A or V to select
"H-Pos", then press _ or
ENTER.
Press _ or _ to adjust the
setting.
NOTE:
• If no buttons are pressed for more
than approx. 30 seconds, the Menu-
screen will return to normal Monitor-
screen automatically.
• The "Component Set" and "PC Set"
settings are not effective for normal
mode, or other input modes.
6
H-Pos:
V=Pos:
Clock:
Phase:
Auto adjust
(PC Setting only):
Setting:
To adjust the horizontal position of the
image on the PC Monitor-screen.
To adjust the vertical position of the
image on the PC Monitor-screen.
To minimize any vertical bars or stripes
visible on the screen background.
This must be adjusted after the frequency
of your PC has been set to 60hz to
optimize pic ture quality (page 16).
To optimize "H-Pos", "V-Pos", "Clock"
and "Phase" automatically.
To return your settings to the factory
settings.
Press MENU to return to the normal screen.
39