Manual

TV operation
To select the video input source
Press INPUT SELECT to view a signal from another device
connected to your LCD TV, such as a VCR or DVD player. You can
select ANT, Composite, S-video, Component or PC depending on
which input jacks you used to connect your devices.
NOTE:
The TV is capable of holding a still
video image or On screen display
image on your TV screen indefinitely. If
you leave the still video image or On
screen display image displayed on
your TV for an extended period of
time, you risk permanent damage to
your TV screen.
When the TV receives an analog
signal, DISPLAY shows only analog
information.
After 10 seconds, DISPLAY screen will
return to normal TV-operation auto-
matically, when a Digital signal is
received.
After 4 seconds, DISPLAY screen will
return to normal TV-operation auto-
matically, when a Analog signal is
received.
22
CH +/-
Press and release CH+/-. The channel
automatically stops at the next channel
set into memory.
For proper operation, before selecting
channels, they should be set into the
memory. See pages 18 and 19
"Memorizing channels".
DISPLAY
Press DISPLAY to display the current information on the screen.
When the TV receives a digital signal, the
digital information will appear.
Channel number
Broadcast program name
Station name
Program guide
Audio language
V-CHIP RATING
When the TV receives a analog signal,
the analog information will appear.
Channel number orVIDEO mode
selected
Channel label (if preset)
Stereo or SAP (second audio program)
audio status
Content rating
Press DISPLAY again to clear the call display.
RECALL
This button allows you to go back to the
last channel selected by pressing
RECALL. Press RECALL again to return
to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The
TV's sound will be silenced and "MUTE"
will briefly appear on the screen. The
sound can be switched back on by
pressing this button again or the VOL +
or-.