Operation Manual

48
Press the PLAY Button on the
playback VCR, then press the
PAUSE/STILL button.
Press the PAUSE/STILL
buttons on both units
simultaneously to begin the
duplicating process.
NOTES:
•
It is recommended that the tape speed be set to the SP mode on the TV/VCR for best results.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.
Press the REC/OTR button
on the remote control of the
TV/VCR, then press the
PAUSE/STILL button.
CONNECTION TO CAMCORDERCONNECTION TO ANOTHER VCR
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown below.
DUPLICATING A VIDEO TAPE
Press the INPUT SELECT button twice to
select AUDIO/VIDEO input position. The "LINE
2" will appear on the screen.
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
NOTE: You can also use the rear AUDIO/VIDEO IN
Jacks. Select "LINE 1" by pressing the INPUT
SELECT button.
LINE 2
To AV Jack
AUDIO/VIDEO CORD
(NOT SUPPLIED)
PLAYBACK
CAMCORDER
3
4
5
2
1
If you connect the TV/VCR to another VCR or CAMCORDER, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
INPUT SELECT
RECORDING TV/VCR
To VIDEO/AUDIO IN
TO AUDIO OUT
PLAYBACK VCR
AUDIO/VIDEO CORD (NOT SUPPLIED)
TO VIDEO IN
TO VIDEO
OUT
TO AUDIO
IN
RECORDING TV/VCR
PAUSE/STILL
PAUSE/
STILL
PAUSE/
STILL
REC/OTR
PAUSE/STILL
PLAY
5450201C E (P48-BACK) 2*9*99, 16:2148