OWNER’S MANUAL R COMBINATION 19” COLOR TELEVISION AND DVD/CD PLAYER CDVD1900 TV/CATV MODE SELECTION When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television) mode. If not using CATV (Cable TV), set this menu option to the "TV" mode. ORION WEBSITE FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ORIONSALESINC.COM Before operating the unit, please read this manual thoroughly.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5. CLEANING Unplug this unit from the wall outlet before cleaning.
IMPORTANT SAFEGUARDS (Continued) 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system.
26. SOUND DISTORTION Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire. 27. HEADPHONES When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. 28. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 29.
Features Color TV With DVD/CD player Unique space saving design combines a 19" color TV and a DVD/CD player. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture/Audio quality of the DVD exceeds other software. Picture quality is higher than Super VHS. Audio quality is higher than audio CD. The DVD also has special options; audio language selection, subtitle language selection or multi-angle, etc. The DVD PLAYER can play back audio CDs.
Contents Before using your unit IMPORTANT SAFEGUARDS .............................................. 3 Features ............................................................................... 6 Contents ............................................................................... 7 Parts and functions .............................................................. 8 Remote control ..................................................................... 9 Power source ...........................................
Parts and functions Front OPEN/CLOSE button Disc tray Power indicator STOP button Headphone Jack POWER PHONES POWER VOLUME CHANNEL STOP PLAY SKIP SKIP OPEN/CLOSE VIDEO IN L AUDIO IN R (MONO) AUDIO IN (L/R) jacks VIDEO IN jack SKIP buttons CHANNEL UP/DOWN buttons PLAY button Remote sensor POWER button VOLUME UP/DOWN buttons VIDEO IN jack Rear VIDEO OUT jack RF IN jack VIDEO L (MONO) AUDIO R UHF/ VHF OUT DIGITAL AUDIO COAXIAL LINE 1 IN AUDIO OUT (L/R) jacks AUDIO IN (L/R) jacks AC powe
Remote control Page DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 OPEN/CLOSE SELECT/ ENTER CH MUTING DVD MENU RETURN SET UP/ TV MENU AUDIO ANGLE SUB TITLE CANCEL/ RESET QUICK VIEW/ ZOOM TITLE INPUT SELECT DISPLAY/CALL Call TV information Call DVD information 15 40 TV/DVD Switch between TV/AV and DVD 26 OPEN/CLOSE Tray open or close 27 0-9 Direct channel selection of TV Input setting Enter a password VOLUME +/– Adjust volume of TV 14 CH / Select channel of TV Cursor buttons
Remote control Inserting Batteries 1 two "AAA" batteries 2 Install 3 (supplied), paying attention to Open the battery compartment cover in the direction of the arrow. Replace the compartment cover. the polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of Approx. 5 meters. Approx.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire) Connect the 75 ohm Cable from the Combination VHF/UHF Antenna to the Antenna Jack.
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Setting the language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Adjustment menus and messages will appear in the language of your choice. On-screen language selection (step 5) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. turn on the TV/DVD, press POWER. The Power indicator 1 To will light.
TV operation turn on the TV/DVD, press 1 To POWER. the volume level by 2 Adjust pressing VOLUME + or – . The DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of green bars also decreases. OPEN/CLOSE the TV/CATV menu 3 Set option to the appropriate position. (See page 17.
CHANNEL DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 OPEN/CLOSE CALL Press DISPLAY/CALL to display the current informations on the screen. Press DISPLAY/CALL again to clear the call display. 0 CH • Channel number or VIDEO mode • Stereo or SAP (second audio program) audio status • Audio output status SELECT/ ENTER CH MUTING AUDIO DVD MENU ANGLE STEREO SAP CH 012 SEL.
Closed caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 Captions: This Closed Caption Mode will display text on the screen in English or another language (depending on the setting of the Closed Captions CH 1/2).
To memorize channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
To memorize channels (Continued) AUTOMATIC MEMORY TUNING TV MENU in the TV mode. The TV menu screen 1 Press will appear. or until SET UP menu Press 2 appears. DISPLAY/ CALL POWER 1 2 3 4 5 6 7 TV/CATV ADD/DELETE AUTO CH MEMORY TV/DVD 8 CATV ADD OPEN/CLOSE < / / / > /MENU 3 CH MEMORY”, then press Press or to select the “AUTO or . The TV will begin memorizing all the channels available in your area.
Setting the V-Chip An age limitation can be set to forbid children to see and hear violent scenes or pictures for adults, etc. The TV/DVD corresponds to "TV RATING" and "MOVIE RATING". To use the V-Chip function, you must register a password. TO REGISTER PASSWORD DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 OPEN/CLOSE TV MENU in the TV mode. The TV menu 1 Press screen will appear. or until the OPTION 2 Press menu appears.
Setting the V-Chip (Continued) TO SET THE V-CHIP SET menu, press 1 In theor V-CHIP to select the “TV V-CHIP SET V-CHIP TV RATING MOVIE RATING CHANGE PASSWORD RATING”. DISPLAY/ CALL POWER 1 TV/DVD 2 < OPEN/CLOSE or to display the 2 Press desired setting. 3 4 5 6 7 8 9 OFF : TV-Y : TV-Y7 : TV-G : TV-PG: TV-14 : TV-MA: 0 CH MUTING DVD MENU RETURN SET UP/ TV MENU AUDIO ANGLE SUB TITLE CANCEL/ RESET INPUT SELECT < < SLEEP 4 Press rating.
TO CHANGE PASSWORD Press TV MENU in the TV mode. 1 The TV menu screen will appear. or until OPTION 2 Press menu appears. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 OPEN/CLOSE V-CHIP SET LANGUAGE/IDIOMA/LANGUE < / / / /MENU > or to select the “V3 Press CHIP SET”, then press or .
Picture control adjustment Picture controls are factory preset but you can adjust them individually as follows: TV MENU in the TV mode. 1 Press The TV menu screen will appear. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 or until PICTURE 2 Press menu appears. OPEN/CLOSE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS < < 4 Press setting.
Stereo and separate audio program (SAP) The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.
Sound control adjustment Sound controls are factory preset but you can adjust them individually as follows: BASS TREBLE BALANCE DISPLAY/ CALL POWER TV MENU in the TV mode. 1 Press The TV menu screen will appear. Press or until the AUDIO 2 menu appears. TV/DVD OPEN/CLOSE < 1 2 3 4 5 6 7 8 9 / / / /MENU > or to select the item 3 Press you want to adjust. BASS TREBLE BALANCE 0 < CH 4 Press setting.
Disc The unit detects whether the disc loaded is a DVD disc or Audio CD and automatically sets the mode. Disc Notes Do not play DVD-ROM, DVD-Audio, CD-ROM, CD-R, CDV, CD-G, Video CD or Photo CD to prevent accidental erasure of prerecorded material. This unit applies to DVD discs from Region 1 only. Other Region number discs cannot be played with this unit. This unit does not play MP3 files.
Setting setup language The setup language can be selected. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 Preparation • Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. Note: When connecting to other equipment, unplug the unit from the AC outlet. • Press POWER on the unit or on the remote control to turn on the unit. The POWER indicator will light. • When using an amplifier, switch on the amplifier. OPEN/CLOSE Press TV/DVD to select the 1 DVD mode.
Playback procedure DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 OPEN/CLOSE. 1 Press The disc tray will open. OPEN/CLOSE 0 CH a disc onto the tray. 2 Place Hold the disc, position it SELECT/ ENTER CH MUTING AUDIO DVD MENU ANGLE SET UP/ TV MENU RETURN CANCEL/ RESET SUB TITLE INPUT SELECT SLEEP E CHAN NEL STO P PLA Y SKIP SKIP OPEN/C LOSE POW VID ER EO PHON ES IN L (MO AUDIO NO) IN R PLAY SEARCH SKIP STOP SKIP JUMP PLAY or OPEN/ 3 Press CLOSE.
Special playback Note: there may be a slight delay between you pressing the button and the function activating. DISPLAY/ CALL POWER TV/DVD OPEN/CLOSE Fast Forward Playback Press SEARCH ( ) during normal playback. Each press of the SEARCH ( ) button will increase the speed of the search x2, x4, x8, x20. • To resume normal playback, press PLAY. 1 2 3 Review Playback 4 5 6 Press SEARCH ( ) during normal playback.
Zooming / Locating desired scene Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 OPEN/CLOSE ZOOM during play1 Press back. 1 The centre part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 2 (x 1.5) and (x 1.3), 3 (x 2.0). 0 CH Press / or / to view a different part of the frame.
Repeat playback Title, Chapter, Track Playback Press PLAY MODE during playback or stop mode. DVD Press DISPLAY/ CALL POWER TV/DVD OPEN/CLOSE / : Repeat Off /Enter/Play Mode 1 2 3 4 5 6 Audio CD 9 Press Press 7 8 or ENTER once or twice to select Chapter or Title. 0 CH Repeat Title : /Enter/Play Mode to select Repeat. / or ENTER once or twice to select Track or All.
Program playback/Random playback (Audio CD) You can arrange the order of tracks on the disc. DISPLAY/ CALL POWER TV/DVD OPEN/CLOSE Program playback 1 Press PLAY MODE in the stop mode. Press / to select Play 2 Mode, then press / to Play Mode Repeat select program.
Marking desired scenes The TV/DVD stores the points that you want to watch again. You can resume playback from that scene. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 Marking the Scenes MARKER during 1 Press playback. OPEN/CLOSE 2 Select the blank Marker using / , then press ENTER at the desired scene. 0 CH 3 Press MARKER to remove this display.
Changing soundtrack language You can select the language when you play a multilingual disc. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 OPEN/CLOSE AUDIO during play1 Press back. The current soundtrack language will appear. AUDIO repeatedly 2 Press until the desired language 0 2/8 Fra DolbyDigital is selected. 1/8 Eng DolbyDigital CH The on-screen display will disappear after a few seconds.
Subtitles Turning the Subtitles On and Off When playing back a disc recorded with subtitles, you can turn the subtitles on or off. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 OPEN/CLOSE Press SUB TITLE during playback until “OFF” appears. Off 0 CH SELECT/ ENTER Changing the subtitle language CH MUTING DVD MENU RETURN SET UP/ TV MENU AUDIO ANGLE SUB TITLE CANCEL/ RESET INPUT SELECT SLEEP PLAY SEARCH SKIP STOP SKIP JUMP your desired language appears.
Changing angles / Title selection / DVD menu Changing Angles When playing back a disc recorded with multi-angle facility, you can change the angle that you are viewing the scene from. DISPLAY/ CALL POWER 1 TV/DVD 2 OPEN/CLOSE ANGLE during play1 Press back. 1/9 3 The current angle will appear. 4 5 6 7 8 9 0 CH ANGLE repeatedly until the desired angle is se2 Press lected. SELECT/ ENTER Title Selection Two or more titles are recorded on some discs.
Parental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. Parental. Then press DISPLAY/ CALL POWER SET UP in the stop mode. 1 Press or to select Press TV/DVD 1 2 3 4 5 6 7 8 9 Language Picture or ENTER. OPEN/CLOSE or to select Press 2 Parental, then press or 0 until the level you require appears.
To change the parental level Press SET UP in the stop mode or no disc. 1 Press or to select Parental. Then press DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 Language Picture or ENTER. Other 1 0 9/Cancel /Enter/Setup/Return number buttons 2 Press (0-9) to enter the password 0 you have stored. CH MUTING DVD MENU RETURN SET UP/ TV MENU AUDIO ANGLE SUB TITLE CANCEL/ RESET ENTER. 3 Press The rating is now unlocked.
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. a DVD disc and press 1 Load PLAY or OPEN/CLOSE on the unit (see P.27).
Setting the aspect ratio of TV screen You can select the aspect ratio for your TV. 1 Press SET UP in the stop mode or no disc. Press Picture. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 or to select Language Picture Parental Other OPEN/CLOSE /Enter/Setup/Return 2 Press 0 or ENTER, then press or to select Tv Screen.
Setting on screen display/ Status display of disc On screen display can be switched on or off when you press the buttons. 1 Press SET UP in the stop mode or no disc. Press Picture. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 or to select Language Picture Parental Other OPEN/CLOSE /Enter/Setup/Return 2 Press press Display.
Setting menu language You can select the language of the disc menu messages of DVDs. 1 Press SET UP in the stop mode or no disc. Press or Language. DISPLAY/ CALL POWER 1 TV/DVD 2 to select Language Picture Parental Other OPEN/CLOSE 3 /Enter/Setup/Return 4 5 6 7 8 9 0 Press 2 press CH or ENTER, then or to select Menu.
Setting subtitle language The same subtitle language can always be selected even if you replace the disc or turn the power off. Press SET UP in the stop mode or no disc. 1 Press or to select Language. Language Picture DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 Parental Other OPEN/CLOSE /Enter/Setup/Return 2 Press or ENTER, then press or to select Subtitle.
Setting audio soundtrack language The same audio soundtrack language can always be selected by your unit even if you replace the disc or turn the power off. DISPLAY/ CALL POWER TV/DVD 1 2 3 4 5 6 7 8 9 Press SET UP in the stop mode or no disc. 1 Press or to select Language Picture Language. Parental Other OPEN/CLOSE /Enter/Setup/Return Press 2 press 0 or ENTER, then or to select Audio.
Language code list Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU" (see pages 41-43).
Connections to other equipments The exact arrangement you use to interconnect various video and audio components to the TV/DVD is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipments (Continued) Using the audio/video inputs If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT. NOTE: Press INPUT SELECT repeatedly to select the desired mode. “LINE1”, “LINE2” or TV channel will display on the screen for 4 seconds. In the DVD mode this key will not operate. LINE 1 TV Channel LINE 1 (Back) LINE 2 (Front) 1.
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit, then plug it back in.
SYMPTOMS POSSIBLE SOLUTIONS PAGE DVD Playback doesn’t start. • No disc is inserted. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. 27 25 25 No picture • TV/DVD selector is not set correctly. 26 No sound • Check the input selector of the amplifier is set properly. • The unit is in the Special playback mode. • Select the correct Audio Output position on AV amplifier. – 28 45 Picture is distorted during CUE or REVIEW. • The picture will be distorted occasionally.
Specifications GENERAL Power supply: Power consumption: AC 120V 60Hz Operation: 98W Stand by: 8W Weight: 47.4lbs (21.
R limited WARRANTY COMBINATION 19” COLOR TV/ DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of ninety (90) days from date of original purchase in the United States only.
5930901A Z 01/08 5930901AE(48-BACK) Printed in Thailand 52 26/06/2001, 16:06
