User`s manual

Sans Digital – EN104L+(B) Admin Guide

User & Access - Quota Management

Quota management allows the administrator to apply limitation on capacity and number of files used by each user.

1. Select logical volume that you wish to apply quota from Select Logical Volume.

2. Check the Enable Quota box and select Apply.

3. Enter block limit per user. This controls the capacity.

4. Enter file limit per user. This controls the number of files.

5. Select Apply button.

NOTE:

• Usage field next to block limit and file limit shows the current usage by the user.

• Quota scheme is designed to monitor aggregate usage of all the users/groups. As a result, sum of quota assigned for the logical

volume may exceed the total capacity of the logical volume.

• Quota is not active if the logical volume has “Everybody Access” assigned for Access Control.

• Deleting logical volume when quota is assigned will erase all quota assignment. To reset quota, deactivate and reactivate quota for

desired logical volume.

CAUTION: When using with SFM configuration, enable quota before

enabling SFM. If SFM requires disabling, disable quota before disabling

SFM.