User`s manual

Sans Digital – EN104L+(B) Admin Guide
33
Storage Management - Format
Format a logical volume to erase all of its contents. Although it is not required, you can also change the logical volume name.
CAUTION: Formatting a physical volume cannot be undone and you will be asked to confirm your request. Be sure to move data you need
to save to another location before formatting the volume.
To format a logical volume
, follow the steps below:
4. Select the logical volume from the Logical Volume drop-down list.
5. If you wish to change the volume name (optional), enter a new name in the Enter New Name field using up to 15 alphanumeric
characters with no spaces.
6. Click on Format. The NAS immediately begins to format the selected logical volume.
To exit without formatting and return to the home page, click on Cancel.