User`s manual

Sans Digital – EN104L+(B) Admin Guide
22
Network Setting – DHCP Service
DHCP service on EN104L+(B) can be used to quickly assign IP addresses to the network attached clients. In other words, now the NAS acts
like a DHCP server.
To enable service, check Enable DHCP check box
1. Assign IP address range
2. Enter subnet to assign to the DHCP Clients
3. Enter gateway to assign to the DHCP Clients
4. Enter addresses for primary and/or secondary DNS. Entering both primary and secondary is not absolutely required.
5. For client IP address renewal, input appropriate value in the fields for Day, Hour, Min, and Sec.
NOTE: The DHCP service on EN104L+(B) is not intended to replace the DHCP server of Active Directory Service, Primary Domain
Controller or Network Information Service. This feature is to provide convenient management of local clients that are not part of
aforementioned network infrastructure.
To apply changes, click on Apply at the bottom of the screen. To exit without applying changes and return to the home page, click on
Cancel.