User`s manual

Sans Digital – EN104L+(B) Admin Guide
14
Server Configuration – Restart & Shutdown
This is a page for Restart or Shutdown the EN104L+(B) unit. It may be necessary to restart EN104L+(B) after system changes, upgrades, or
errors.
NOTE: Notify all logged-in users to log out before beginning EN104L+(B) to restart or shutdown, or the unsaved data will be lose and result
is errors.
Restart Now
Click on Restart Now to immediately shut down and reboot EN104L+(B). To avoid errors, you will be asked to confirm your request before
EN104L+(B) is restarted.
Shutdown Now
To completely power down EN104L+(B), click on Shutdown Now. The NAS will start its shut down process and turn off. To avoid errors,
you will be asked to confirm your request before EN104L+(B) is Shutdown.
Remark:
• You can also use the NAS-Finder Utility to power off.
• To force a hardware shut down, press the power button for more than four seconds and it will shut down immediately.
To exit without restarting or shutting down the NAS and return to the home page, click on Cancel.