User`s manual

Sans Digital – EN104L+(B) Admin Guide
13
Server Config – Password Change
This is a page for changing the password of the user that log-in. To change your log-in password, enter the following information:
Current Password
Enter your current log-in password in this field which appears in asterisks for security purposes. By default, the “root” account’s password is:
0000
New Password
Enter the new password between six(6) to eight(8) alphanumeric characters. Non-alphanumeric characters such as – ) # ( * will not be
accepted. The password is case-sensitive and appears in asterisks for security purposes.
Confirm New Password
Re-enter the new password exactly as you entered it in the previous field to verify password accuracy. The password is case-sensitive and
appears in asterisks for security purposes.
CAUTION: Be sure to record your password in a safe place. If you have forgotten your password, you are required to re-install the
EN104L+(B) OS and will lose all data and configuration settings.
Once you have entered all the appropriate information, click on Apply at the bottom of the page to apply the changes. To exit without
applying changes and return to the home page, click on Cancel.