User`s manual
Sans Digital – EN104L+(B) Admin Guide
11
Server Configuration – General Settings
Enter basic server information here such as server name, date, time and language. EN104L+(B) records the date and time of events, files and
folders based on the system date & time set on this page.
Server Name
Enter a unique name to identify the EN104L+(B) server. Up to 15 alphanumeric characters (without spaces) are allowed for the server name.
By default, it is named: EN104L+(B).
Server Description
Enter a description of up to 50 alphanumeric characters for this EN104L+(B) to help identifying its use. This is an optional field.
Date
Enter the system date in each appropriate field in the mm/dd/yyyy format. For example, you would enter 04 / 19 / 2002 for April 19, 2002.
Time
Enter the system time in the 24-hour format. Indicate the hour, minutes & seconds in the hh:mm:ss format.
Time Zone
Select the time zone from the drop-down list. The default setting is America/Los_Angeles (US/Pacific Standard Time).
Language
The “Language” is referred to the language used on the client’s OS. It will not affect the language use in for the Web Admin GUI. The default
language is US English. If you wish to support a different language, select the language from the drop-down list. This multiple language setting
allows users to store and retrieve file and directory names that are in the selected language and US English.
Note: You must re-boot the server after changing language to take effect.
Time Sync by NTP
The “Time Sync by NTP” service allows EN104L+(B) to synchronize the date and time information from the NTP server. It is especially
important for Microsoft Domain environment as the connection will be rejected.
To synchronize with NTP (Network Time Protocol) Server:
1. Select the radio button for Server and Client
2. Select the Stratum Server. If the server is not in the list, add the name of the server and select Add.
3. To delete existing NTP server address, select from the NTP Server List drop down box, select Delete.
To provide NTP Sync Service to attached clients:
1. Select the radio button for Server and Client
2. Enter the Network Address and Subnet Mask, and click Add.
To apply changes, click on Apply at the bottom of the screen. To return to the home page, click on Cancel.