User Manual

Chapter 4 Remote Control

4.1 Accessing by Web Browser

Notes: The default user name is [admin], and can not be changed. The password is as same as the password of

NVR (The default password [null] means you needn't input the password, just keep the password box blank),

then you can login on Web Browser. You will go the interface as shown in the figure below after you login

successfully. You will get the image if the camera connects to the channel successfully.

Before start:

1. Make sure you have a router and high-speed network connection;

2. Connect the NVR to your router by using an Ethernet cable;

3. Upgrade your client software and mobile app to the latest version;

4. Make sure your network speed come up to 1Mbps at least to get the best video recording.

5. Go to NVR’s [Main Menu]- [Info]- [Version] to confirm that the [Nat status] shows connected.

Go to NVR’s [Main Menu]- [System]- [Network]- [IP Address] to get your IP address, for example,

192.168.10.191. Open your IE browser and input the IP address, login with your user name and password, as

shown in the figure below.

192.168.10.191