Manualshelf

User Manual

ManualsBrandsSANNCE ManualsElectronics1080P xPOE Security Camera System with 1TB Hard Drive,4 Pcs 1920TVL Outdoor/Indoor CCTV Surveillance Cameras, Easy Installation, Real Plug & Play XPOE Network Home Video Surveillance System
11121314151617181920
3.7 Backup
Go to NVR’s [Main Menu] - [Record] - [Backup], you can backup the video files to external storage. Plug the
USB drive into the USB 2.0 port, as shown in the figure below.
Click [Backup] button and a dialog box will pop up. You can select the backup files according to the[Type],
[Channel],[Start Time], [End Time]. Add your files, select [Backup format](AVI or H.264) and click [Start], as
shown in the figure below.
3.8 Alarm Setting
[Type]: Select the corresponding type ([All], [Alarm], [MD], [Alarm/MD], [Manual], [General] ) to backup.
[Channel]: Select the corresponding channel to backup.
[Start Time]: Select time to start backup.
[Start Time]: Select time to end backup.
Click [OK] when you get the message of [Backup finished], then you can plug the USB drive out. You need to
install the APP [Displayer] in the CD to play the video on the PC.
Go to NVR’s [Main Menu]-[Alarm] to enter the interface of Alarm setting. Alarm functions include: Motion
Detect, Video Blind, Video Loss, Abnormality,Intelligent, Human Detect as shown in the figure below.
11