User Manual

3.5 Recording Setting
Steps:
1.Make sure hard disk has been installed in advance, and then go to NVR’s [Main Menu]- [Info]- [HDD Info]
to confirm that the status of hard disk is [Normal].
2.Go to NVR’s [Main Menu]- [Record]- [Record Configuration] to enter the interface of recording setting.
The system will keep recording all day long when you set the recording time for 24 hours. Select and check
[Regular](Schedule recording), [Detect] (motion detection recordings), [Alarm](other alarm recordings like
video loss recordings) and click [OK] to save, as shown in the figure below.
8