Installation Guide

7
4. In most cases everyone is happy with the pressure that the cleaning jets put out. If for
any reason you would like a stronger stream, please refer to page 6 in the instructions
and it will explain how to remove the pressure regulator and dramatically increase the
pressure.
If you still need help, feel free to send us an email at [e-mail].
Functions
STOP
1) During WASH or BIDET status, rotate the lever to the vertical
position to stop the freshwater spray.
2) The nozzle moves back to the original position.
3) The water volume decreases while turning the lever towards the vertical
position. It will totally shut off when the lever is on the vertical position.
WASH (REAR WASH)
1) Turn the lever clockwise from the vertical position.
2) The nozzle for rear wash extends forward, and the freshwater spray
function starts.
3) The water volume decreases while turning the lever towards the vertical
position. It will totally shut off when the lever is on the vertical position.
1) Turn the lever counterclockwise from the vertical position.
2) The nozzle for feminine Bidet (front wash) moves forward and the
freshwater spray function starts.
3) The water volume decreases while turning the lever towards the vertical
position. It will totally shut off when the lever is on the vertical position.
Note that the front wash nozzle is slightly longer when fully extended and
directs spray more in the forward direction.
BIDET (FRONT WASH)