Specification Sheet

SANIFLUSH
TWO-PIECE ROUND TOILET SYSTEM
Close-Couple Toilet – 1.28 GPF (4.8 Liter Flush)
SFA 093/095 - 1115
SANIFLUSH 093 & 095


 093 Round Bowl
o Vitreous china
o Integral P-trap and a rear outlet spigot
o Seating height: 16 ½” (without seat)
o Large glazed trapway
o Wash down style toilet
o Low flush toilet; it uses 1.28 gallons
(4.8 L) per flush
o Toilet supplied with a set of lag screws,
plastic anchors and china protectors
o Water spot measures 4” x 4 ¾”
o 1 Year limited warranty


 095 Toilet Tank
o Vitreous china
o Insulated tank to prevent condensation
o The zero re-fill fill valve is easily
adjustable
o The flush valve has a silicone flapper
seal
o Tank is not designed to be used with
refill hose thus not provided.
o Water level mark applied to the
overflow tube
o Toilet tank supplied with bowl screws,
washers and wing nuts
o 1 year limited warranty
o Warranty for fill and flush valve as per
manufacturer
Nominal Dimensions
31-3/4” x 15-3/4” x 27-3/8”
(806mm x 400mm x 694mm)
Fixture Dimensions and Hydraulic
Performance - Meets or Exceeds the
Following Specifications
• ANSI/ASME A112.19.2M and
CAN/CSA B45 Requirements
• IAPMO/UPC Certificate of Listing
• EPA WaterSense labeled
Notes
• Available in white only
• Standard seat dimensions (Seat sold
separately)
• Replacement fill valve recommended –
Fluidmaster 400A or equal (not
supplied)
Round Bowl with Tank (093 & 095)
Care & Cleaning
• When cleaning toilet, wash it with mild
soapy water or liquid cleaners that are
not chlorine or bleach based. Avoid
using harsh detergents.
• We do not recommend the use of in-
tank cleansers. Products containing
chlorine can cause damage to
components inside the tank and cause
them to fail prematurely.