How to Guide

Protection for your ease of mind

SANIALARM

Saniflo provides an efficient solution that

instantly alerts to prevent inappropriate use

and carry out a prompt intervention.

The SaniAlarm has a level pressure switch that triggers an alarm fixed on the

top of the unit if the volume of water exceeds the maximum allowed level.

The alarm emits a continuous 80 dB warning sound until it is switched off or

the problem is rectified. The SaniAlarm is battery operated and can be

installed on most Saniflo macerating units and drain water pumps.

*Suitable for use with Saniplus, Sanibest Pro, Sanipack, Sanigrind Pro and Sanivite

Part# 050

DESCALER

Prolongs the life of all Saniflo pumps by cleaning and disinfecting.

This special formula is perfectly designed for cleaning and descaling

the heart of your system and its internal components.

Drill a 3/8" diameter hole on

top of the case where indicated.

Turn the switch to

the ON position.

Install two AA batteries

(not included)

Insert the tube and position

the Sanialarm on top.

Disconnect from the main power.

Pour the solution inside the bowl

and flush the toilet once.

Let the solution sit inside the toilet

and pump for a couple of hours.

Connect to main power supply and

flush the toilet a couple of times.

• Specifically created for use with Saniflo products

• Laboratory formulated with phosphoric acid

• Concentrated solution for optimum cleaning power

• Regular usage prolongs unit life and maintains efficiency

• Harmless to septic tank operation