Specification

CONNECTIONS
SANICONDENS • PART N
O
040
Example of installation. Follow local plumbing codes for actual install.
The Sanicondens is a small pump used to pump condensate from condensing boilers, HVAC systems,
water heater systems, etc. The Sanicondens will pump condensate waste up to 15 feet in height
and/or 150 feet away from a soil stack.
Discharges the condensate waste through a 3 ⁄ 8” vinyl tube. A non-return valve is included on the
discharge connection provided with the system.
The small, powerful pumping unit can be floor or wall mounted. It comes with provisions for already-to-
wire connection to an external overflow switch that will shut down the appliance or alert the consumer
in the event of overflow. It also includes all necessary hardware for ease of installation; 20 Ft of vinyl
tubing, inlet adapter, discharge adapter.
Discharges condensate from a condensing boiler or other condensate producing fixtures.
The condensate will drain into the system via two 1” inlets located on top of the enclosure.
SANICONDENS Condensate Pump
ø 3/8” Drain
Drain
Drain
15ft vertical
PUMPING DISTANCE
AN EASY SOLUTION
TO PUMP
CONDENSATE AWAY
FROM CONDENSING
BOILERS AND AIR
CONDITIONERS
One of the most powerful and
quiet condensate pumps on the
market with features that no
competitor can match.
The two-quart capacity
condensate pump comes
equipped with all the necessary
hardware for easy installation.
It can be installed on top of a
flat surface or mounted on a
wall.
15 Ft
150 Ft
AIR
CONDITIONER
BOILER
APPLICATIONS
RESIDENTIAL
HVAC
COMMERCIAL
44