User's Manual

Safety Operation Instructions
We recommend user to test device before first use to
familiarize with the functions and to ensure that device
functions as per published specifications.
Do not replace the internal battery in the battery
compartment. The device is installed with internal
battery that is certified safe and compatible by the
manufacturer. Replacing with incompatible battery may
result in short circuit and fire hazard. Please contact
Sanho for the battery compartment assembly
replacement instead.
Do not use the device in a moist environment and do not
handle the device if your hands are wet. If liquid enters
the device, please immediately power off the device,
remove the battery, and send it back to the dealer for
repair. Never try to use a device that has been corroded
by liquid, as it may result in short circuit and cause fire.
Carefully power off the device and remove the battery if
the device produces odd smell, extreme heat and
smoke. Handle with care, as the device may be very hot.
If you are not using the original AC charger provided,
please make sure your charger has an output up to 10W
and certified safe by your country safety commission.
The device may be hot while charging. Please charge
the device in a ventilated area.
Power off the device before opening the back cover and
installing or removing the hard drive.
Do not place the device near heavily magnetized object.
Otherwise, data may be lost.