Owner manual

97
Network proles
Each time that you connect your radio to a WiFi network, the radio will store the details of that
connection (SSID, security key, DHCP/IP address settings) as a prole. Up to four such proles
are stored in the radio so that if the unit is used in multiple locations there is no need to enter the
network settings when returning to a location previously visited. The radios stores the four most
recent proles in memory identied by their SSID. Normally the radio will attempt to connect to
one of the stored proles and only if it is unable to do so will you need to use the Network Wizard.
In the event that you visit a location only once you may wish to delete the prole for the network
in that location to avoid losing other proles.
1. Access the menu for the current mode by pressing and holding the Menu button. Press the
Folder Up or Down buttons until 'System settings' is highlighted on the display. Press the Select
button to enter the settings menu.
2. Press the Folder Up or Down buttons until 'Network' is highlighted on the display. Press the
Select button to enter the Network settings menu.
3. Press the Folder Up or Down buttons until 'Network prole' is highlighted on the display. Press
the Select button to see the stored proles. The prole which is currently in use (if any) is marked
with an asterisk.
4. To remove a prole from memory, press the Folder Up or Down buttons to highlight the prole
to be deleted and then press the Select button.
5. The radio will offer a 'YES' or 'NO' selection. Press the Folder Up or Down buttons to select 'YES'
and then press the Select button. The selected prole will be deleted.
Note: that it is not possible to delete a prole which is currently in use.