Owner manual
3
Before you can use this product
Before you can use your internet radio, you must have the following:
 A broadband Internet connection (not required for DAB, FM or Music 
 Player functions).
 A wireless access point (WiFi) or a wired Ethernet connection connected 
 to your broadband Internet Service Provider, preferably via a router. 
 In many cases the broadband modem, router and wireless access 
 point will be a single combined unit supplied by your Internet Service 
 Provider or bought from a computer store.
 If your wireless network is congured to use Wired Equivalent Privacy 
 (WEP) or WiFi Protected Access (WPA/WPA2) data encryption then you 
 either need to know the WEP, WPA or WPA2 key used for encryption so 
 you can get the internet radio to communicate with the network, or your 
 router needs to offer WiFi Protected Setup (WPS).
If connecting using WiFi, the internet radio will typically work within a 10-20 
metre radio from your wireless access point. The actual range achieved will 
depend upon the building type, other nearby wireless network, and possible 
interference sources. DAB and FM radio functions can operate wherever 
the internet radio is able to receive a suitable broadcast signal.
IMPORTANT: 
Before you continue, make sure that your wireless access point or router 
is powered up and working with your broadband Internet service (use your 
computer to verify this). To get this part of the system working you must 
read the instructions supplied with the wireless access point or router.
●
●
●










