User Manual

7
GB
Using the touch panel
The DDR-47BT  sound  system has a stylish  touch  panel instead of 
conventional buttons.
To operate the  buttons  simply touch  the button area with the tip of 
a finger for  about half  a second. The  clock  set and  system menu 
functions marked with a dot (●) are accessed by means of a long touch 
(2-3 seconds) on the appropriate button until the display on the sound 
system shows that the command has been accepted.
You may find that at first, the sound system does not always detect 
that you have touched a button. If so, try touching with a  little more 
pressure, or for slightly longer. You will soon find the optimum touch 
needed to control your sound system. (See also the section of” Touch 
Panel Sensitivity Control”)
The panel may be cleaned using a dry cloth. Do not use abrasives, 
cleaning uids or solvents.
Remote control functions
Most of the functions of the DDR-47BT sound system can be controlled 
using either the touch panel or the remote control.
However, there are a few functions which are only accessible using the 
remote control. These are:
DAB / FM radio station presets DAB / FM auto-tune
DAB menu function CD / USB / SD CARD track access 
by numbers
CD / USB / SD CARD random 
track control
Audio mute
As with the front panel, some operations require a longer operation 
of the button (explained in the relevant sections). In this case simply 
keep your nger held on the remote control button for 2-3 seconds until 
the display on the sound system shows that the command has been 
accepted.










