User Manual

51
GB
Charging with USB socket
● The USB jack can only provide power for the USB memory stick only
with 1A 5V maximum and most of iPhone models. However, it does
not support external Hard disk drive and all of mobile phones and
electronic device.
● The USB jack charging function can only be charged in AUX-IN, USB
or Bluetooth mode.
● The maximum volume of the output power speaker will decrease
when your USB is charging.
Important:
Do not connect this USB socket with your PC USB port, as it highly
possible may cause breakdown of the units.
Software upgrade
From time to time, new software features for your radio may be
developed. Your radio has therefore been designed to allow its internal
software to be updated using your USB upgrade port.
You should not attempt to update your radio unless it is recommended
to you by Sangean Customer Services. Updating the software may
remove all network settings, radio station presets
and alarm settings from your radio.
Software updates for your radio may be available in the future.
As software updates become available software and information on
how to update your radio can be found at
http://sg.sangean.com.tw/rst/rst.asp
http://www.sangean.eu/rst/rst.asp
www.sangean.com.au.
For more information, please contact our Head Office by sending an
email to [e-mail]
1. Plug the USB into the USB socket in the rear of the unit and your PC
USB port.
2. Press the Radio button to switch to the DAB mode.
3. Press the Menu button to enter the setting menu. Press the
Tuning up / down button until ‘Software Upgrade’ is appeared on the
display. Press the Select button to enter the setting.
4. Go to the website above to download the latest software. Follow the
on-screen instructions provided with the upgrade software to
complete the software upgrade.