Operation Manual

Presetting stations - DAB and FM

There are 5 memory presets on the panel for each of the 2 wavebands.

However, There are 10 memory presets on the remote control for each

of the 2 wavebands.

1. Press and release the On / StandBy button switch on the radio.

2. Tune to the required station as previously described.

3. Press and hold down the required Preset button until the display

shows e.g. “Preset 1 stored”. The station will be stored under

the chosen preset button. Repeat this procedure for the

remaining presets.

4. Stations stored in preset memories may be overwritten by following

the above procedure.

Recalling a preset station - DAB and FM

1. Press and release the On / StandBy button to switch on the radio.

2. Select the required waveband by pressing the Band button.

3. Momentarily press and release the required Preset button, your radio

will tune to the station stored in preset memory.