Specifications
25
22. Press and release the Select button to conrm the alarm setup setting.
The alarm setup setting is stored in the radio.
23. The display will show “Alarm saved” and will appear alarm symbol
indicating the alarm is set.
24. Pres the Tuning Up or Down buttons to select Off. The display will
show “Alarm saved” but the display will not appear alarm symbol.
Note:
If the above alarm setting procedures are not completed, the display will
show “Alarm Not saved“. You may have to start over above procedures
again.
25. The alarm has now been set and the unit will revert to the previous
display. The alarm symbol indicator (alarm 1 or 2) will show on the
display.
Note:
When you radio is in Standby mode, you can press and hold the Alarm
button to enter the Alarm 1 or 2 setting menu. Following the setting pro-
cedures as previously described.