User Manual

Setting the clock manually

The DCR-10 will automatically set its clock when tuned to a

DAB+ radio station or to an FM station which is broadcasting

the time via RDS.

If the clock cannot be set using DAB+ or FM radio then you will

need to set the clock manually before the alarm function can

be used. The clock may be set while the unit is in standby mode

or while playing.

If it becomes necessary to set the clock manually, please follow

these steps.

1. Press and hold the Tuning control, and rotate the Tuning control

until the display shows SYSTEM. Press the select button,

and rotate the Tuning control until TIME FMT shows on the display.

2. Press and release the Select button to choose the time format.

Rotate the Tuning control to choose either 12H or 24H.

3. Press and release the Select button to enter the setting.

4. Press and hold the Tuning control, and rotate the Tuning control

until “Time Set” appears on the display. Press and release the

Select button and “AUTO CLK/MANUAL” will appear on

the display. Rotate the Tuning control to choose Manual,

and press and release the Select button. The hour digits on

the lower text display will flash.

2-12

1-2,

4-8,

10-12