Manual

15
Recording with timer record
The recording function of DAR-101 can be set up with a timer that can
start recording and stop at a preset time.
1. First press the Power button to turn on the recorder, and switch
the mode switch to Music mode. Press and hold the Timer Record
button to enter the setting.
2. Ensure an SD card with sufficient space is inserted correctly in
the SD card slot. Rotate the Tuning control until the MODE
is highlighted, and press the Enter button to select to enter
the setting.
3. Rotate the Tuning control to choose the frequency between ONCE
or DAILY, then press the Enter button to confirm the setting.
4. Rotate the Tuning control until SOURCE is highlighted, and press
the Enter button to enter the setting. Rotate the Tuning control to
select to record from Microphone or Aux In, then press the Enter
button to confirm the setting.
5. Rotate the Tuning control until RECORD TIME is highlighted,
and press the Enter button to enter the setting. The hour digits of
the START TIME will begin flashing. Rotate the Tuning control to
select the required record starting hour, and press the Enter
button to enter the minute setting. Rotate the Tuning control to
select the required record starting minute, and press the Enter
button to confirm the setting.
2-6