User guide

The ATS-909X features an automatic tuning system that will
quickly and automatically set all your memory presets on FM,
LW and MW based upon the signal strength of the
incoming stations. Among the many conveniences offered by this
feature it is especially useful for the traveler who can automatically
nd all the local stations in any strange city he/she may travel to
with just the press of a button.
To start ATS press and hold for more than 2 seconds the button
designated ATS/FM or ATS/LW or ATS/MW. The memory presets
M1 through M9 are assigned stations selected automatically by
the ATS system. The ATS system will automatically store 18
presets on MW, 27 presets on FM and 9 presets on LW. (9 presets
on each page. Once the ATS has set the 9 presets on 1 page
press the PAGE button to change pages and repeat the ATS
procedure to select the remaining presets). An audible signal
indicates the automatic search has been completed and the
presets have been assigned. ATS is not possible on the SW band.
ATS – Automatic Tuning System
If you know the frequency of the station you are seeking press
FREQ button and enter the frequency you desire directly using
the numerical key pad. Don’t forget to use the decimal point button
if the frequency you are entering has a decimal point in
its frequency. Press the Enter Selection button to enter
the frequency.
DIRECT TUNING USING KEY PAD
18 19