Manual

Note:

When the buzzer alarm activates, the alarm will start softly and

gradually increase in level. It will sound for 1 minute and silence for

1 minute in repetition for 30 minutes unless cancelled. The radio

will sound non-stop at the selected time for up to 60 minutes for

other radio alarm types.

To set radio for an alarm timer, rst press one of the TIMER buttons

and (SSB)/RDS/Alarm MODE button until Radio Alarm icon ashes

on the display. Then set up the alarm time (hours and minutes)

by using the numerical keys on the key pad and Enter Selection

button. When the sounds beep it means the alarm has been

activated.

Then tune to the station you would like to be awaken to. Press the

Memo button and then press the TIMER button number. When the

sounds beep it means the alarm has been activated. Your radio will

automatically switch on at the setup time.

In addition to being able to set 3 different wake up times it is

possible to set each wake up time to a different frequency. To view

the setting of an active timer, press the required TIMER button. The

timer number and the alarm time or the radio alarm frequency can

be viewed ashing in the LCD display.

The active alarm may be stopped by pressing the STANDBY/

SLEEP button. To permanently disable the alarm, press the

required TIMER button number followed by the Cancel button.

Then the timer number will disappear on the display.