Manual

ALARM FUNCTION

The ATS-909X has three timer circuits as indicated by TIMER

buttons. The alarm functions may be set with the power on or off.

To set the alarm, press one of the three TIMER buttons. The timer

and button number will ash in the LCD display along with the icon

indicating radio or buzzer for approximately 12 seconds. Select

radio or buzzer by pressing (SSB)/RDS/Alarm mode button. While

ashing continues, you may set time (hours and minutes) for alarm

using the numerical keys on the key pad. When complete press

Enter Selection button. When the sounds beep it means the alarm

has been activated. Repeat steps for other timers.

Note:

If you select the buzzer as your alarm, once it is active, the volume

will not be adjustable but by HWS (Human Wake System), which

makes the alarm bell go from soft to loud. If you select the radio as

your alarm, once it is active, the volume will be adjustable by the

volume control.