Owners manual

Operating the radio

Tuning the radio

1. Press the Power button to turn on the radio.

2. Select the required waveband by pressing the Band button.

There are 3 bands which are FM, AM and AUX-IN.

3. Rotate the Tuning knob to the desired frequency, shown in the

display.

4. Or, press the TUNING knob to seek for the next available station.

5. Rotate the Volume knob (on the side of the radio) to get required

sound level.

6. To turn off the radio, press the Power button.

Fine tune

This function allows you to tune the station with more specic step

increment with 10kHz in FM/ 1kHz in AM.

1. Press the Band button to FM/ AM mode.

2. Press and hold the Tuning control until ‘FINE TUNE’ shown on

the display. Now you can tune the station with 10kHz in FM or

1kHz in AM.

3. To cancel the function, press and hold the Tuning control until

‘FINE TUNE’ disappears from the display.