Radio User Manual

8. Rotate the Tuning control to select the required alarm frequency

option when radio mode is selected. The display will show the

frequency options for the alarm. The alarm options are as follows:

OFF – the alarm will be disabled

ONCE – the alarm will sound once

DAILY – the alarm will sound everyday

WEEKDAYS – the alarm will sound on weekdays only

WEEKENDS – the alarm will sound only at weekends

Press the Tuning control to confirm the setting.

9. The alarm has now been set. “SAVED” will show on the display,

and then will revert to previous mode.

10. Rotate the Volume control to set the required volume. Adjust the

switch inside the battery compartment to set the required volume

level for buzzer alarm. When the digital receiver is set to wake

by DAB, FM radio, or voice message, the alarm volume will be the

volume previously listened to.

To view an alarm setting press and release the Alarm button and the

display will show “Alarm 1”. Press and release the Tuning control to

enter the Alarm 1 setting, and repeatedly press and release the Tuning

control to view through the alarm details.

Active alarms are shown using small alarm indicator at the top of the

playing displays and on the clock display when in stand-by.