Instruction manual

[Name] Printing-paper feeding

[Code]: <0A> H or <10>D

[Function]: Prints data in the printer buffer and feeds paper.

[Operation]: When no data is found in the printer buffer, paper is fed only.

[Name] Printing/paper feeding

[Code] <0D>H or <13>D

[Function] Prints data in the printer buffer and feeds paper.

[Operation] When data preceding <CR> is not found, nothing is done,

When data + <CR> + <LF>, prints data + <CR>, and <LF> is ignored.

[Name] Double-size enlarged printing mode specification

[Code] <0E>H or <14>D

[Function] With the code entered, data is printed in double-size enlarged characters.

[Name] Double-size enlarged printing mode reset

[Code] <0F>H or <15>D

[Function] Resets the double-size enlarged printing mode by entering the code.

[Example of coding]

Lprint chr$(14);" ABC"; chr$(15);" DEF";chr$(13)

ＡＢＣ

ＤＥＦ

Enlarged size characters (7 x10) Ordinary size characters (7 x 5)

CAN

[Name] Cancel

[Code] <18>H or <24>D

[Function] Clears all the data stored in the data buffer and waits for the next data entry.

[Operation] When SO, SI, ESC+"S" + n1n2n3n4 has been entered in the data buffer, the

function is cleared. However, ESC +"c", ESC +"R" + n performs a flag

operation when this command is entered, it is not entered in the data buffer,

so that the previous state is not resumed even when a CAN code has been

entered.