Specifications

１７
SK1-21/31
2- 6．Interface Connector
Connect the interface cable after turning the printer power OFF.
Plug in the interface connector observing the correct orientation.
・ Always grip the connector when unplugging the interface cable.
・ Place the interface cable to avoid tripping over it.
2- 7．Power ON/OFF
①Power ON
Provides power to the power connector.
②Power OFF
Disconnects the power through the power connector.
2- 8．Paper near-end sensor
The paper near-end sensor on the paper holder is adjustable for in three positions.
The sensor is positioned along to the paper roll axis at the factory. To adjust and choose a suitable
position, slide it up or down.
・Paper roll diameter: φ102mm
Position 1
Position 2
Position 3
Near end Sensor
※When a 102mm roll is
installed, do not position the
sensor in the circled areas.
Setting position