How to reduce vibration in metal cutting User Manual

Sandvik Coromant – How to reduce vibration in metal cutting4
Select your tool system
One application within metal cutting that is very sensitive to vibration
is internal turning. The different tools for the applications have various
parameters that can be adjusted to suit the machine, the component and
the material.
In this chapter we will talk about the choice of tooling, various appli-
cations, how to minimise the risk of vibration and how to improve
productivity.
Choosing the correct tool for the application
Depending on the application and the component, it is important to choose
the tool that can give the highest output and security.
Depending on the component diameter there are three Sandvik Coromant
systems available to you.
CoroTurn RC with double-sided negative inserts for applications with
hole diameters from 20 mm. This system enables applications from n-
ishing to roughing using modern grades and Wiper inserts for increased
productivity.
CoroTurn 107 single-sided inserts with seven degree relief angle are designed
for turning applications with hole diameters from 8 mm and applications
where copying is the main focus.
CoroTurn 111 is a system of inserts with eleven degree relief angle, designed
for hole diameters from 6.5 mm - 32 mm where the overhang is generally
longer and where there is a need for tools requiring lower cutting forces.