users guide Instruction Manual

58
Insert seats
The programme is based on eight different insert seats depending on insert widths and
geometries, see the table.
Insert seat size D E F G H J K L
Insert widths, mm 1.5 2.0-2.4 2.4-3.2 3.0-4.0 4.0-5.0 5.0-6.4 6.0-7.1 7.9-8.0
Max cutting dept
A
r
max
12.9 19.0 18.9 18.8 23.7 23.6 23.5 28.4
Insert seat size to correspond with insert and toolholder.
CoroCut
Q-Cut
The Q-Cut system is based on only a V-shaped form, ideal for straight cutting forces, e.g.
parting off applications. Q-Cut have 7 different insert sizes of 20, 25, 30, 40, 50, 60 and 80.
The toolholder have a screw and spring clamping design.