Owner's manual

Application example
Surface machining of carbon bre
Facts and demands:•
- Primary structure carbon bre
- Minimal splintering of bres and delamination
- Good surface nish and dimensions
Solutions•
- CoroMill Century with PCD inserts
- Cutter: R590-04C3-11M
- Inserts: R590-1105H-PS2-NL CD10
Cutting data•
- Cutting speed: 300m/min
- Fz: Roughing: 0.16 / Finishing: 0.1mm/tooth
- Ap: Roughing: 2.5mm / Finishing: 0.5mm
CoroMill Century
SANDVIK COROMANT USER’S GUIDE - COMPOSITE SOLUTIONS 47